Operation Manual

Installation and Setup
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer 37
User Guide
4. To enable the wireless network adapter, disconnect the Ethernet cable from the printer.
Note: Only one network connection can be active. During power on, if a network cable is detected, it
is enabled and the wireless network adapter is disabled.
5. Turn on the printer.
6. In the Admin Menu, configure the Wi-Fi settings. For details, see the System Administrator Guide at
www.xerox.com/office/WC3615docs.
Note: For details on configuring the Wi-Fi settings, refer to the System Administrator Guide.
Removing the Wireless Network Adapter
1. Turn off the printer.
2. Unscrew the thumbscrew on the back of the left door, then open the left door.