Operation Manual

Maintenance
Xerox
®
WorkCentre® 3615 Black and White Multifunction Printer 141
User Guide
Printing the Configuration Report
1. At the printer control panel, press the Machine Status button.
2. Touch Information Pages, then touch Configuration Report.
3. Touch Print.
Viewing Meter Readings
1. At the printer control panel, press the Machine Status button.
2. Touch Meter Readings.
3. After viewing the readings, touch X to close the window or press the Services Home button to return
to the Services Home menu.
Adjusting Paper Type
Use Adjust Paper Type to compensate for paper thickness within a paper type. If the printed image is
too light, use a heavier setting for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the setting for the paper you are using.
To adjust the paper type:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Touch Service Tools.
4. Touch Adjust Paper Type.
The default selection for Plain appears.
5. Touch Plain.
6. Touch Lightweight or Heavyweight, then press OK.
Adjusting the Transfer Unit
Adjusting the Transfer Unit can decrease a mottled appearance or white spots in your prints. This
adjustment is available for each paper type.
Note: This setting affects print quality. The higher the value, the darker the printed output appears.
To adjust the transfer unit:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Touch Service Tools.
4. Touch Adjust Transfer Unit.
5. Touch the paper for the adjustment, touch (-) or (+), then touch OK.
6. Repeat this procedure for each paper type you need to adjust.
7. To return to the Services Home menu, press the Services Home button.