Operation Manual

Page 4-28 Quick Reference Guide
Stored Programming
Use this feature to programme up to 10 commonly used programming sequences.
For example, combinations of selections such as Edge Erase and Bound Originals.
The machine stores only the programming features for the job, NOT the images.
Each time a stored job is used the images must be scanned.
To use this feature, use the up/down scroll buttons to select the required storage
location, then select a function button - Store or Recall Programming.
Options:
Job Number Use to scroll to a job number between 1 and 10.
Store
Programming
Use this option to store the current programming selections. If a job has already
been stored under the selected Job Number, a confirmation pop-up screen
appears. If Confirm is selected, the new programming will be stored.
Recall
Programming
Use this option to retrieve programming that has been stored under a specified job
number. First select a Job Number, then select Recall Programming. The recalled
programming will overwrite the current copy programming.
After being recalled, the selection can be modified further and re-stored if required.