Operation Manual

Page 4-22 Quick Reference Guide
Covers
Use this feature to automatically add covers to your copied set using stock taken
from a different tray than the copies. Covers must be the same size and orientation
as the main body of the job.
HINT: Covers and Inserts can be selected in the same job.
Options:
No Covers The feature is switched off.
Front Only Use this option to add a front cover to the copies.
Back Only Use this option to add a back cover to the copies.
Front and Back Use this option to add both a front and back cover to the copies.
Output Cover
Images
Use this option to select the imaging requirements for the covers. Output Cover
Images options are as follows:
Blank Cover Adds Blank covers to the copies.
1 Sided
Places the first original in the job as the front cover image, and the last image
as the image on the inside back cover of the document.