Operation Manual

Quick Reference Guide Page 4-15
Copy
Original Input
Use this option to programme the size of the originals being scanned or enable the
machine to recognise the size of the originals.
Options:
Auto Use this option to allow the machine to recognise the size of the originals being fed
through the document handler.
NOTE: When originals are scanned using the document glass and an Auto feature
such as Auto Paper, Auto% or Auto Centre is selected, the machine will scan the
original twice.
Manual Platen
Input
Use this option to specify the dimensions of the document scanning region when
scanning from the document glass. There are several dimensions that correspond
to common document sizes and orientations.
Select a standard size or use Custom to manually adjust the scanning dimensions.
Mixed Size
Originals
Use this feature to copy a document containing mixed size originals. The originals
must be the same width, for example A4 long edge feed and A3 short edge feed.
Load documents in the document handler when using this feature.