Operation Manual

Page 4-14 Quick Reference Guide
Binding Erase Erases a specified area from the centre of the bound original to eliminate unwanted
marks caused by scanning the binding. When Left Page or Right Page is selected,
between 0 and 25 mm can be erased. When Both Pages is selected, between 0 and
50 mm can be erased.
Edge Erase
Use this feature to “refresh” the quality of an original that has become torn or frayed
at the edges, or that has hole punch, staple or other marks.
Options:
Border Erase Erases equal amounts on all edges of the copies. From 3 - 50 mm in 1 mm
increments can be erased.
Edge Erase Use to erase a specific amount from a specific edge of the copy. From 3 - 50mm in
1mm increments can be erased from each edge.
Print to Edge Use this option to print to the edge of the output stock.
NOTE: This option may reduce the ability of the system to clean itself and can
cause defects on the output if used excessively.