Operation Manual

Quick Reference Guide Page 4-13
Copy
Bound Originals
This feature is used to copy pages from bound documents onto separate single-
sided or double-sided pages.
The bound original is placed face down on the document glass with the spine lined
up with the marker on the rear edge of the glass. Align the top of the bound original
against the rear edge of the document glass. Do not close the document handler
during the copying process if Auto Reduce/Enlarge is selected.
NOTE: It is recommended that users avoid looking at the scan bar light when the
document handler is open.
HINT: If necessary, apply a little pressure to the centre of the bound original to
flatten it during scanning.
Options:
Off The feature is switched off.
Left Page Copies only the page on the left when looking at the open bound original, face up.
Right Page Copies only the page on the right when looking at the open bound original, face up.
Both Pages Copies both pages of an open bound original and places each page on a separate
sheet of paper.