Operation Manual

Page 4-8 Quick Reference Guide
Custom Use this option to adjust the height (Y) and the width (X) dimensions for reduction
or enlargement of each dimension independently.
NOTE: Output will NOT be reduced or enlarged proportionally.
Custom options are as follows:
Paper Supply
Use the Paper Supply options to select Auto Paper or a paper tray for the copy job.
Options:
Auto Paper With this option selected the machine chooses the correct paper for the copy job
based on the size of the originals being scanned.
Tray 1 Use this option to select the paper loaded in Tray 1.
 Tray 1 holds 500 sheets of 80 g/m
2
paper. Weight ranges from 60 - 200 g/m
2
.
Sizes range from A5 LEF to A3 SEF. Most stocks can be used, except for
transparencies, labels and envelopes.
Tray 2 Use this option to select the paper loaded in Tray 2.
 Tray 2 holds 500 sheets of 80 g/m
2
paper. Weight ranges from 60 - 200 g/m
2
.
Sizes range from A5 LEF to A3 SEF. Most stocks can be used, except for
transparencies and labels. The Envelope Tray must be used to load envelopes.
NOTE: Some machine configurations do not support envelope printing, please
refer to the Product Overview chapter for more information.
Tray 3 (Optional) Use this option to select the paper loaded in Tray 3.
100%
Produces an image on the copies the same size as the image on the
original.
Auto % Automatically fits the image of the original onto the paper selected.
X50% Y100%
Enables you to customise the width (x) and height (y) reduction or
enlargement to suit your own requirements. A percentage can also be
entered by touching the X or Y box and using the keypad.