Operation Manual

Quick Reference Guide Page 3-5
Getting Started
Making Copies
Copy features include...
¾ Producing stapled or hole punched sets, if there is a finisher available
¾ Image Quality adjustment
¾ Auto Reduce/Enlarge
¾ Copying mixed size originals
¾ Adding printed or blank dividers into transparency sets
¾ Arranging multiple images on a page
¾ Adding printed or blank covers
¾ Adding Annotations
¾ Inserting printed or blank sheets or tabs
¾ Image Shift
¾ Erasing edges and borders
¾ Build Job to apply different programming within a set of documents
¾ Storing the programming for frequently run jobs
¾ Creating booklets
1
¾ Load the documents
either in the document
handler or on the
document glass.
NOTE: Documents are
only scanned once.
2
¾ Access the Basic Copy screen - if
necessary select the [Features]
button on the control panel.
3
¾ Select the required features on the
Touch Screen.
¾ Select the number of copies
required.
¾ Press [Start].