Operation Manual

Page 2-4 Quick Reference Guide
To identify your finisher type and for more information about each finisher, refer to
“Finishing Devices” on page 2-13.
Your chosen finisher is fitted instead of the Offset Catch Tray.
Hole Punch This option is available if your machine is equipped with any of the three finishers
fitted with a Hole Punch. The kits available are 2 Hole, 4 Hole or Swedish 4 Hole.
Each sheet is punched individually, so there is no limit to the number of sheets in
the set. Additional Hole Punch kits can be purchased as an option, although only
one kit can be fitted at one time.
Convenience
Stapler
Up to 50 sheets of 80g/m
2
paper can be stapled manually using the Convenience
Stapler. The staple cartridge holds 5000 staples.
NOTE: The Convenience Shelf must be fitted to your machine before the
Convenience Stapler can be installed.
Envelope Tray This tray is inserted inside paper tray 2 to enable envelope printing. Up to 55 C10
envelopes can be loaded in the tray.
Basic Fax Kit
(Embedded)
This kit enables a single telephone line connection. Basic Fax, also referred to as
Embedded Fax, will scan your documents and send them to most types of fax
machine connected to a telephone network. The images are sent from your
machine directly to the fax number entered. This type of fax uses normal telephone
lines to transmit data and standard telephone rates will apply.
Extended Fax
Kit
(Embedded)
Enables two telephone lines to be attached to the machine. This provides all the
features of the Basic Fax kit plus the capability to send and receive faxes same time.
Foreign
Interface
Device
Enables the attachment of a third party access and accounting device, such as a
card swipe or coin operated unit.
256MB
Electronic Pre-
Collation
(EPC) Memory
Additional temporary storage area for scanned information.