Operation Manual

Quick Reference Guide Page 12-3
Troubleshooting
Fault Clearance
If you are unable to clear the fault, refer to the next section to contact your local
Xerox Welcome and Support Centre for assistance.
NOTE: For additional Troubleshooting information please refer to the Training and
Information CD (CD2) or the System Administration CD (CD1).
1
When a fault occurs, a fault screen
displays which provides recovery
instructions.
¾ Follow these instructions to clear
the fault.
NOTE: Any printed sheets removed
will automatically be reprinted once
the paper jam is cleared.
2
Paper jams
¾ The fault screen will indicate the
location of the jam.
¾ Use the green handles and knobs
indicated in the instructions displayed
to remove the jammed paper.
¾ Ensure that all jam clearance handles
and levers are returned to their
correct positions. The red flashes
behind the jam clearance handles
and levers should not be visible.
NOTE: Jam Clearance areas vary
depending on your machine model and
configuration.
3
Document jams
¾ Remove all the documents from the
document handler and document
glass as instructed.
¾ Re-order the documents as at the
start of the job and reload. The
documents will be recycled
automatically to recover the job.