Operation Manual

Page 7-22 Quick Reference Guide
Build Job
Use this feature to build a job that requires different settings for each page. For
example, if a set of documents consists of some pages with text and some with
photos, the appropriate setting for each original can be applied and the job can still
be completed as a single job. This feature is also useful if your job has more than
70 pages, which exceeds the maximum capacity of the document handler.
To use Build Job, split the job into programming and scanning segments. Select the
Build Job option and select On. Programme and scan the first segment. Continue
to programme and load segments until the whole job has been scanned. When the
entire job has been scanned, select Build Job Controls and select End Build Job.
The job is processed as a single job.
Options:
Off The feature is switched off.
On Use to enable the Build Job feature.
Select End Build Job after the last segment of the job has been scanned.
NOTE: Some of the Network Scanning features are only set when programming
the first build job segment, for example File Format, Document Name and If File
Already Exists.
Build Job
Controls
Provides options which can be selected when using Build Job.
Build Job Controls options are as follows:
End Build Job
Select this option after the last segment of the job has been scanned. The
job will be sent to print.
Delete All segments Use to delete the current job and return to the main Build Job screen.