Printer User Guide
Table Of Contents
- Contents
- Introduction
- Getting Started
- Unpacking
- Installing the Toner Cartridge
- Loading Paper
- Connecting Telephone Line
- Connecting a Printer Cable
- Turning the Machine On
- Changing the Display Language
- Setting the Machine ID
- Setting the Time and Date
- Setting the Paper Size and Type
- Setting Sounds
- Using the Save Modes
- Installing Xerox drivers in Windows
- System Requirements
- Installing Xerox Drivers in Microsoft Windows XP or Windows 2000 using the USB port
- Installing Xerox Drivers in Microsoft Windows XP, 2000 or Windows 98/ME using the Parallel port
- Installing Xerox Drivers in Microsoft Windows 98 or Windows Millennium using the USB port
- Printer Driver Features
- Using ControlCentre
- Paper Handling
- Printing Tasks
- Copying
- Scanning
- Faxing
- Changing the Fax Setup options
- Available Fax Setup Options
- Loading a Document
- Selecting the Paper Tray
- Adjusting the Document Resolution
- Sending a Fax Automatically
- Sending a Fax Manually
- Redialing the Last Number
- Confirming Transmission
- Automatic Redialing
- About Receiving Modes
- Loading Paper for Receiving Faxes
- Receiving Automatically in Fax Mode
- Receiving Manually in Tel Mode
- Receiving Automatically in Ans/Fax Mode
- Receiving Manually Using an Extension Telephone
- Receiving Faxes Using the DRPD Mode
- Receiving Faxes in the Memory
- One-touch Dialing
- Speed Dialing
- Group Dialing
- Searching for a Number in Memory
- Printing a Phonebook List
- Sending Broadcast Faxes
- Sending a Delayed Fax
- Sending a Priority Fax
- Adding Documents To a Scheduled Fax
- Canceling a Scheduled Fax
- Using Secure Receiving Mode
- Printing Reports
- Using Advanced Fax Settings
- Maintenance
- Troubleshooting
- Using USB Flash Drive
- Using Your Machine In Linux
- Using Windows PostScript Driver (WorkCentre PE120i Only)
- Printing From a Macintosh (WorkCentre PE120i Only)
- Installing Machine Options
- Specifications
- Index
Printing From a Macintosh
(WORKCENTRE PE120I ONLY)
C.4
Setting Up the Machine
The way to set up your machine is different depending on which
cable you use to connect the machine to your computer-the
network cable or the USB cable.
For a Network-connected Macintosh
Mac OS 8.6 ~ 9.2
1
Follow the instructions on page C.2 to install the PPD file on
your computer.
2
From the
Apple
menu, select
Chooser
.
3
Click
LaserWriter 8
(the PostScript driver provided with
your Macintosh).
The name of your machine appears on the list.
4
Select
XEC000xxxxxxxxx
from the printer box (where the
xxxxxxxxx varies depending on each of the machines) and
Click
Select
.
If Auto Setup does not work properly, click
Select PPD
,
choose
Xerox WC PE120 Series
, and click
OK
.
5
When the setup is complete, you see your machine icon
created as a desktop printer.
6
Close the
Chooser
.
7
When a message window appears telling you that you have
changed your current machine, click
OK
.
Mac OS 10.1 ~ 10.3
1
Follow the instructions on page C.2 to install the PPD file on
your computer.
2
Open
Print Center
from the Utilities folder.
3
Click
Add
on the Printer List.