Printer User Guide

Copying
5.8
Reduced/Enlarged Copy
Using the Reduce/Enlarge button, you can reduce or enlarge
the size of a copied image from 25% to 400% when you copy
original documents from the document glass or from 25% to
100% from the ADF. Note that the zoom rate available is
different depending on the document loading method.
To select from the predefined copy sizes:
1 Press Reduce/Enlarge .
The default setting appears on the bottom line of the
display.
2 Press Reduce/Enlarge or the scroll button ( W or X ) to
find the size setting you want.
3 Press Enter to save the selection.
To fine-tune the size of copies:
1 Press Reduce/Enlarge .
2 Press Reduce/Enlarge or the scroll button ( W or X )
until “Custom:25-100%” or “Custom:25-400%” displays
on the bottom line. Press
Enter .
3 Press the scroll button ( W or X ) until the copy size you
want appears on the display.
Pressing and holding the button allows you to quickly scroll
to the number you want.
You can also enter the value using the number keypad.
4 Press Enter to save the selection.
N OTE : When you make a reduced copy, black lines may appear at
the bottom of your copy.