Flat Panel Television User Manual

VIZIO VW37L HDTV30A User Manual

Version 4/2/2008 6

www.VIZIO.com

Preparing Your LCD HDTV for Wall Mounting

Preparing Your LCD HDTV for Wall MountingPreparing Your LCD HDTV for Wall Mounting

Preparing Your LCD HDTV for Wall Mounting

The VIZIO VW37L HDTV30A can either be kept on the stand base or mounted on the wall for viewing. If

you choose to mount the VW37L HDTV30A on the wall, please follow the instructions below for removing

the stand base.

To remove the stand base

To remove the stand baseTo remove the stand base

To remove the stand base

1. Unplug all of the cables and cords

from your VIZIO VW37L HDTV30A.

2. Place the VW37L HDTV30A face

down on a soft and flat surface

(blanket, foam, cloth, etc) to prevent

any damage to the TV.

3. Remove the eight (8) screws holding

the base to the VW37L HDTV30A.

4. Carefully remove the stand base.

Now, the VW37L HDTV30A can fit securely to

a mount (sold separately) by utilizing the

mounting holes in the center of the back panel

of the High Definition TV. Please make sure to

read the instructions of your specific mount to

properly hang the VW37L HDTV30A.

The pitch of the mounting holes is 510mm

horizontally and 200mm vertically.

The screw type required is metric M8, 1.25mm

pitch. The length of the screws will depend on

the thickness plate being attach to the TV set,

our brackets come with different length

screws.

To find the perfect mount for the VIZIO VW37L HDTV30A, browse VIZIO’s certified mount selection at