Flat Panel Television User Manual

VIZIO VW37L HDTV30A User Manual
Version 4/2/2008 25
www.VIZIO.com
2.8
2.82.8
2.8 Connecting a PC Comput
Connecting a PC ComputConnecting a PC Comput
Connecting a PC Computer
erer
er
1. Turn off the power to the High
Definition TV and PC Computer.
2. Connect a 15-pin D-Sub RGB
(VGA) cable to the RGB output of
your pc computer and the other end
to the RGB PC input (blue area) at
the rear of the High Definition TV.
3. Connect the Audio Out on your pc
computer to the RGB PC Audio
(this connection will require an 1/8”
stereo mini plug at the end which goes into the TV) input (blue area) at the rear of the High
Definition TV.
4. Turn on the HDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or side of the High Definition TV.
Note:
a) For the best picture quality when connecting a pc computer through RGB PC, set your pc
computer timing mode to VESA 1366 x 768 at 60Hz. Please refer to the pc or graphic
card’s user guide for additional information on how to set the timing mode and the video
output requirements of the product.
b) A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at
an electronics store.