Operation Manual

Xerox Travel Scanner 150
User’s Guide
62
Configure Before Scan
You can set up the scanner so that, when you put a page in, a different scanning interface opens before the
scanning starts. You can then use the interface to change the Resolution, Scan Mode, and other settings. When you
scan, the scanned image will still be sent as the file type and to the same Destination Application already selected in
the One Touch Properties window for that button. To set up the scanner for this capability, you select Configure
Before Scan from the scan configuration list.
The option Configure Before Scan can be used when you want to scan multiple pages and have them appear in one
file.
1. Open the One Touch Properties window.
2. Select the scan configuration Configure Before Scan.
3. Click OK or Apply on the One Touch Properties window.
To Scan Using Configure Before Scan
1. Put a document in the paper feed slot on the scanner.
2. The TWAIN Interface opens.
3. Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White, Resolution in DPI, and
Page Size.
4. Click the Scan button on the TWAIN Interface.
5. The item is scanned. When finished, click the Done button and the image will be sent to the Destination
Application specified in the One Touch Properties window.
Creating Multiple Page Files
You can use Configure Before Scan to create multi-page documents from individually scanned pages.