Operation Manual

Xerox Travel Scanner 150
User’s Guide
35
4
Scan Using AutoLaunch
This chapter includes:
• Scanning on page 36
• Configuring One Touch AutoLaunch on page 37
• Turn AutoLaunch Off/On on page 38
• Scanning Interfaces on page 40
When you insert an item into the scanner, it is automatically scanned and the image is sent to a destination
location or application on your computer, or to a network drive.
Note: Always remove any staples or paper clips from documents before inserting them into the scanner’s paper
feed. Staples and paper clips can jam the feed mechanism and scratch the internal components. Also remove any
labels, stickers, or Post-It™ notes that may come off during the scanning process and get stuck in the scanner.
Misuse as described here will void your scanner’s warranty.