User manual

Settings · Setting the Fax Switch¦ 67

4. (Only for devices without built-in answering machine): Using [ select the total number

of rings. . The device stops the ring after these total number of rings and accepts a call

or a possible silent fax.

5. Confirm with OK.

6. Use [ to select the number of rings for the fax switch. After the number of rings, the

fax switch switches on and distinguishes between fax transmissions and telephone calls.

While the device is checking the call, it continues to ring.

7. Confirm with OK.

8. Using [, set the volume.

9. Confirm with OK.

Silent Fax Transmission

Setting the Night Mode

1. Press OK, 52 and OK.

2. Configure the same settings as for the day mode (see steps 2 to 9).

Setting the Timer

Timer

The timer switches between the modes ™ (day) and ˜ (night) at the configured times.

1. Press OK, 53 and OK.

2. Enter the time at which the device should switch to

™ (day) mode, for example 06

00 for 6 o'clock a.m.

3. Confirm with OK.

4. Enter the time at which the device should switch to

˜ (day) mode, for example 22

00 for 2 o'clock a.m.

5. Confirm with OK.

Special Settings

Silent Fax Reception

If you would like to accept a fax without preceding rings, set the number of rings of the fax

switch to

Switching Off All Rings

All Rings Off

If you don't want to be disturbed, e.g. in the night, by any incoming calls, you can set the

number of rings to

0. The device switches immediately to silent fax reception.

Notice

Silent Fax Transmission

Older devices do not transmit any fax-tone (= CNG tone) as an announcement for

fax transmission (= silent fax transmission). If the total number of rings has been set

to a value using

7, silent fax transmissions cannot be received automatically.