User manual

64 ¦ Settings · Selecting the Country
EN
Selecting the Country
Setting the Country Correctly
Reset When Setting the Country
1. Press OK, 93 and OK.
2. Use [ to select the country in which you are operating the device.
3. Confirm with OK.
4. Using [ select
SURE: YES.
5. Confirm with OK.
Entering Number
Page Header
Your name and number are added together with date, time and page number at the top edge
of each fax transmission (= header).
1. Press OK, 94 and OK.
2. Enter your number. Using # or * you can enter a plus sign.
3. Confirm with OK.
Entering Name
1. Press OK, 95 and OK.
2. Enter the name using the letter keypad. Enter capital letters by pressing and holding +
key. You can delete individual characters using \. You can enter space using ½. Press
CTRL and the respective letter key to enter the special character printed above it.
3. Confirm with OK.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your de-
vice is not adapted to the telephone network. If your country is not included in the
list, you must select a different setting and use the correct telephone cable for the
country. Consult your retailer.
CAUTION!
Settings will be Deleted!
When you select a new country, all settings are reset to the factory defaults for that
country. Saved data remains intact. Check the number entered for the header.
Notice
Navigating in the Menu
You can move the cursor using [. Use C to delete individual characters.