User manual

10 ¦ Safety Notes · Warning: Electrical Safety Information

Cleaning Your Product

Before cleaning this product, unplug the product from the electrical outlet. Always use mate-

rials specified for this product. The use of other materials may result in poor performance and

may create a hazardous situation. Do not use aerosol cleaners, they may be explosive and

flammable under certain circumstances.

Warning: Electrical Safety Information

• Plug the power cord directly into an electrical outlet easily accessible. Do not use an exten-

sion cord. If you do not know whether an outlet is grounded, consult a qualified electrician.

Mains Connection 1

• This equipment is to be used on a branch circuit that has larger capacity than rated ampere

and voltage of this machine. See data plate on the rear panel for the rated ampere and volt-

age of this equipment.

• Only use the power cord supplied with the equipment.

• Do not place this equipment where people might step on or trip over the power cord.

• Do not place objects on the power cord.

• Do not override or disable electrical or mechanical interlocks.

• Do not obstruct the ventilation openings.

• Never push objects of any kind into slots or openings on the equipment.

Disconnect Device

Disconnect Device: The power cable is the disconnect device for this equipment. It is at-

tached to the back of the machine as a plug-in device. To remove all electrical power from

the equipment, disconnect the power cable from the electrical outlet.

Emergency Power Off

• If any of the following conditions occur, disconnect the power cord from the electrical outlet

immediately. Call an authorized local service representative to correct the problem.

• The equipment emits unusual noises or odors.

• The power cord is damaged or frayed.

• A wall panel circuit breaker, fuse, or other safety device has been tripped.

• Liquid has spilled into the equipment.

• The equipment is exposed to water.

• Any part of the equipment is damaged.