Xerox Wide Format Solutions 8855/721P Stacker Operator Manual THE DOCUMENT COMPANY XEROX 701P39432
Prepared by: Global Knowledge and Languages Services 780 Salt Road Webster, New York 14580 Copyright© 2003 by Xerox Corporation. Allrights reserved. XEROX and all product names and number names are trademarks of XEROX CORPORATION. Other company trademarks are also acknowledged. Printed in U.S.A.
Table of Contents It’s Illegal ..................................................................... 2 FCC Compliance ......................................................... 2 Introduction to your Stacker ...................................... 3 Safety Notes ................................................................ 4 Identifying the Parts on the Stacker .......................... 6 Location of the Stacker Serial Number ...................... 7 Stacker Operation .....................................
2 It’s Illegal FCC Compliance In the USA In the USA It is against U.S. law to copy copyrighted material without permission of the copyright owner unless the copying falls within the “Fair Use” library reproduction rights of the copyright law. Class A Further information on these U.S. provisions may be obtained from the Copyright Office, Library of Congress, Washington, D.C. 20550, or telephone the Copyright Office at (202) 707-9100 and ask for circular 21. Copying other items may be prohibited.
Introduction to Your Stacker FOR SERVICE: 1-800-822-2979 Congratulations on acquiring your new Stacker. A Customer Service Support Representative will assist you in keeping your stacker operational and, if required, will arrange for a Customer Service Engineer to visit your stacker and restore its performance. This User Guide provides information that is needed to operate the Stacker. The information below is needed when you call your Xerox support experts. PURCHASE OF OTHER EQUIPMENT: 2.
4 Safety Notes Your stacker has been designed and tested to meet strict safety requirements. These include safety agency examination and approval, and compliance to established environmental standards. Please read the following instructions carefully before operating the Stacker. NOTE: Refer to Instructions as needed to ensure the continued safe operation of your stacker. FOLLOW all warnings and instructions marked on or supplied with the product. UNPLUG the stacker from the wall outlet before cleaning.
Safety Notes (continued) UNPLUG this stacker from the wall outlet and refer servicing to qualified service personnel under the following conditions: - When the power cord is damaged or frayed. - If liquid has been spilled into the product. - If the stacker has been exposed to rain or water. - If the stacker is producing unusual noises or odors. - If the stacker has fallen or the cabinet has been damaged. - The safety feature has been activated for a second time.
6 Identifying the Parts on the Stacker Upper Panel Assembly Inlet Stacker Unit Thumb Screws Frame Assembly Power Switch Printed Wiring Board (Transmission) Media Supports Release Handle Power Indicator Light Release Handle Printed Wiring Board (Reception)
Location of the Stacker Serial Number Stacker Jam Clearance In order to locate the serial number of your stacker, you must first push down the release lever and slide the stacker away from the printer. The paper fed from the printer will be either cut or uncut. Caution To ensure the safety of the user, be aware during jam clearance that the surface will be hot. The serial number plate is located on the left of the front cover facing the printer.
8 Top View Stacker Relocation The stacker cannot be moved except by a DRC rigger. To ensure that the stacker operates reliably after moving it to a new location, consider the following guidelines: · The new location must provide minimum clearances around the stacker. These clearances are shown in the diagram on the right. · The flooring in the new location must be adequate to support the weight of the stacker and be reasonably level.
Technical Data Dimensions: Width: 34” (864mm) 57.5” (1461mm) w/paper supports extended. Depth: 41” (1041mm) Height: 28.5” (724mm) Weight: 108 lbs. (49kg) Paper Size: 36 x 48” (914mm x 1219mm) Max. Stacker Capacity: 200 sheets of plain paper with minimal scatter 500 plain paper sheets Max. Electrical Data: Current service: 3 Amps or more Power Supply: 110V - 240V Frequency: 50/60Hz Power Consumption: 60W Temperature: 50°F - 90°F (10°C - 32°C) Humidity: 20 - 85% Noise Level: 57dB Max.
