Stacker User's Manual
Stacker 1000 Operator Manual 9
Technical data
'LPHQVLRQV
:HLJKW 100 lbs. (45.5 kg)
+HLJKW 37.9 inches (963 mm)
:LGWK 52.8 inches (1341 mm)
'HSWK 44.6 inches (1133 mm)
3ULQWHUPHGLDLQIRUPDWLRQ
0HGLDW\SH
• Bond (20 lb.)
• Vellum (20 lb.)
• Film (4 mil.)
• Tracing (4 mil)
0HGLDVL]H
• Roll Feed - 11 inches to 36 inches (279.4 mm to 914.4 mm)
width 3 inches (76.2 mm) core diameter to 6.7 inches (170.2
mm) O.D.)
6WDFNHUFDSDFLW\
Maximum of 1000 prints of various sizes
Maximum of 750 D-size (A1) prints
Maximum of 375 E-size (A0) prints
(OHFWULFDOUHTXLUHPHQWV
9ROWDJH 85-264 VAC
)UHTXHQF\ 47-440 Hz
6WDQGE\&XUUHQW 0 Amps
5XQQLQJ&XUUHQW 0.8 Amps (115 VAC) for USA and Canada
0.5 Amps (250 VAC) for EO
The stacker is designed to operate either on a 15 A (115
VAC), 60 Hz for the USA and Canada or on a 20 A (240
VAC), 50 Hz for EO, single phase line with a circuit
breaker. A standard 15A or 20A, three-prong, grounded
receptacle is required.