- QuickLabel Systems Thermal Transfer Printer Operation & Setup Guide

QLS-8100 Xe 4-7
System Menu Options are available in a Pause state only.
Display Cntr Adjusts the display of the label counter. Possible
values are Off, Batch, or Total.
Memory Card Selects whether to write-protect the memory card.
Possible values are Write Protect ON or Write
Protect OFF.
Format Memory Card Formats the memory card.
Front Panel
Lock/Unlock
Locks/Unlocks the front panel with a password.
Time Sets up the time on the built-in, real-time clock.
Date Sets up the date on the built-in, real-time clock.
Factory Reset Returns the printer settings to the factory defaults.
Options Menu Options are available in a Pause state only.
Mirror Mode Activates mirror mode. Possible values are ON or
OFF.
Cutter Activates the cutter accessory. Possible values are
Enabled or Disabled.
Cut Flag Activates the cut flag. Possible values are ON or
OFF. This option is available only if the cutter is
enabled.
Pull Back Enables/disables the pull back function. Possible
values are Enabled or Disabled. This option
requires special hardware. Contact QuickLabel
Systems for more information.
Applicator Activates the label applicator mode. Possible
values are Enabled or Disabled.