WorkCentre User's Guide Pro 555, Pro 575
Table Of Contents
- XEROX
- Table of Contents
- 1 How to Use This Manual
- 2 Introduction
- 3 Getting Started
- Printing a Menu Map
- Setting the Date and Time
- 1. Press:
- 2. Using the Numeric Keypad and the arrow keys, enter the date, then press Enter
- 3. Select the Date format.
- 4. Select the Month format.
- 5. Select the Time format:
- 6. Using the Numeric Keypad and arrow keys, enter the time, (if necessary, use the arrow key to s...
- The menu selection screen redisplays. Press Exit or Stop to return to the standby mode.
- Setting your Machine ID*
- Setting the Dial Mode*
- Setting the Send Header
- Setting the Receive Footer
- Loading Paper
- Bypass Tray:
- Paper Tray:
- Setting the paper size
- Document Specifications
- Selecting the Scan Resolution
- Selecting the Scan Contrast
- To Receive
- To Send
- To Copy
- To Print
- 1. Install the print drivers supplied with your WorkCentre following the instructions on the CD.
- 2. To print from your application select Print from you File menu.
- 3. Select the printer name you have given to the WorkCentre print queue.
- 4. Select any printing options you require.
- 5. Select OK to send you documents to the WorkCentre
- Phonebook Reports
- 4 Basic Troubleshooting
- Paper Jam
- 1. Remove any documents from the Document Support and Copy Output Tray.
- 2a. Bypass Tray
- Pull up the Document Output Tray and pull the jammed paper straight out of the machine.
- 2b. Main Paper Tray
- Remove the Bypass Tray and pull the jammed paper straight out of the machine.
- 2c. Optional Paper Cassette
- Remove the Optional Paper Cassette Cover and pull out Paper Cassette. Press down on the stack of ...
- Remove the stack of paper from the Optional Paper Cassette and pull the jammed paper straight out...
- 3. Push the Top Cover Open Button to the Top Cover and open the Top Cover.
- 4. Remove the Toner Cartridge and the Drum Cartridge.
- 5. Pull up the Paper Guide and remove the jammed paper while pressing the Paper Holder to the rea...
- 6. If the paper is jammed partway through the Fuser Unit (black colored housing), remove the jamm...
- 7. If the paper is jammed partway through the Paper Exit Guide, open the Paper Exit Guide and rem...
- 8. Install the drum cartridge into the machine, aligning the guides of the cartridge with the gro...
- Color coordinated “1” labels have been affixed to the drum cartridge and to the inside of the mac...
- Make sure the drum cartridge is inserted inside the machine as far as it will go.
- 9. Holding onto the toner cartridge’s handle, lower it into the machine. Make sure that the four ...
- Color coordinated “2” labels have been affixed to the toner cartridge and to the inside of the ma...
- The cartridge will click into place when it is completely installed.
- 10. Replace the Paper Exit Guide, Paper and Bypass Tray.
- 11. Press down on the Top Cover until a “Click” is heard to ensure the latches engage.
- 12. Verify the display has returned to the Standby Mode.
- Document Jam
- Paper Jam
- A Safety Certification and Environmental Compliance
- Index
A-2 WorkCentre Pro 555/575
WARNING
This product must be earthed
This product is equipped with a 3-wire grounding type plug (e.g., a
plug having a third grounding pin). This plug will fit only into a
grounding-type power outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the receptacle if you
are unable to insert the plug into the outlet. Never us a grounding
adapter plug to connect the copier to a power source receptacle that
lacks a ground connection terminal.
This product should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of power
available, consult your local power company.
Do not allow anything to rest on the power cord. Do not locate the
product where persons will step on the cord.
Your equipment is equipped with an energy saving device to
conserve power when the machine is not in use. The machine may
be left on continuously.
Slots and Openings in the cabinet and in the back and sides of the
product are provided for ventilation. To ensure reliable operation of
the product and to protect it from overheating, these openings must
not be blocked or covered. The product should never be located near
or over a radiator or heat register. This product should not be placed
in a built-in installation unless proper ventilation is provided.
Never push objects of any kind into the slots of the product as they
may touch dangerous voltage points or short out parts which could
result in a fire or electric shock.
Never spill liquid of any kind on the product.
Never remove covers or guards that require a tool for removal, unless
directed to do so in a Xerox approved maintenance kit.
Never defeat interlock switches. Machines are designed to restrict
operator access to unsafe areas. Covers, guards and interlock
switches are provided to ensure that the machine will not operate with
covers opened.
Use of an extension cord with this product is not recommended
or authorized. Users should check building codes and insurance
requirements if a properly earthed extension cord is to be used.
Ensure that the total ampere ratings of the products plugged into the