Corporation User Guide Printer
6.3 <
Copying>
2-up or 4-up copying
Your machine can print 2 or 4 original images reduced
to fit onto one sheet of paper.
2 or 4-up copying is available only when you load
originals into the ADF.
1 Press Copy.
2 Load originals face up in the ADF.
For details about loading an original, see page
5.1.
3 Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
4 Press the Scroll buttons until 2-Up or 4-Up
appears and press Enter.
5 Press the Scroll buttons to select the colour
mode you want.
There are two modes as follows:
•Yes-Color: Colour copy
•Yes-Mono: Black and White copy
6 Press
Enter
to begin copying.
1 2
3 4
1 2
2-up copying
4-up copying
Note
• You cannot adjust the copy size using the
Reduce/Enlarge button for making a 2- or
4-up copy.
ID card copying
Your machine can print 2-sided originals on one sheet
of A4-, Letter-, Legal-, Folio-, Oficio-, Executive-, B5-,
A5-, or A6-sized paper.
When you copy using this feature, the machine prints
one side of the original on the upper half of the paper
and the other side on the lower half without reducing
the size of the original. This feature is helpful for
copying a small-sized item, such as a name card.
This copy feature is available only when you place
originals on the scanner glass.
1 Press Copy.
2 Place a single original face down on the scanner
glass.
For details about loading an original, see page
5.1.
3 Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
4 Press the Scroll buttons until ID Card Copy
appears and press Enter.
Place Front Side and Press[Start] appears on
the display.
5 Press Enter, Color Start or
Black Start
.
Your machine begins scanning the front side and
shows Place Back Side and Press[Start].
6 Open the scanner lid and turn the original over.
7 Press
Color Start
to begin colour copying.
Or, press
Black Start
to begin black and white
copying.
Note
• If you press Stop/Clear or if no buttons
are pressed for approximately 30
seconds, the machine cancels the
copy job and returns to Standby mode.
Note
• If the original is larger than the printable
area, some portions may not be printed.