user manual

Programming
Xerox FS 3270, User's Guide
- 28 -
7.2. Setup Functions Supported in FSL mode
Y1 Set IBM Buffer Size (parameters 2,3,4 & 5)
Y2 Set Default LPI (parameters 6 & 8)
Y3 Set Default CPI (parameters: 10, 12, 15 & 16)
Y5 Set Default Page Length (MPL)
Y6 Set Default Max. Print Position (MPP)
Y7 Set Case (Mono,Dual)
Y8 Set LU1 Language
Y9 Set Default Print Quality (parameters 2 & 3)
Y11 Set Default Paper Path (parameters 1, 2 & 3)
Y14 Enable Graphics Option (idaAFP) (parameters 0 & 1)
Y15 RS-232 Baud Rate
Y16 RS-232 Word Length
Y17 RS-232 Parity
Y18 RS-232 Stop Bit
Y24 Serial input/output
Y25 FF Before Local Copy
Y26 FF After Local Copy
Y27 NON-SCS Print Image
Y28 NON-SCS, CR at MPP+1
Y29 NON-SCS, NL at MPP+1
Y30 NON-SCS, Valid FF Followed by data
Y31 NON-SCS, Valid FF at end of buffer
Y32 NON-SCS, FF Valid
Y33 NON-SCS, Automatic Func. at end of job
Y34 Last LF on page sent as FF
Y35 FF from system sent as FF or LF's
Y36 Suppress IBM control codes
Y37 IBM Printer Emulation Select
Y38 IBM Communication Feature (Query, EAB)
Y39 Suppress Empty Forms
Y44 Suppress CR and SP
Y46 Set IRQ Timer
Y48 Set Permanent ESC Character
Y49 Restrict access of EEPROM settings
Y50 FF After Time Elapse
Y51 User-defined string(s) at Power-on
Y52 User-defined string(s) at Printer Power down/ Printer Error
Y53 User-defined string before Error Message
Y54 User-defined string after Error Message
Y55 Barcode type select
Y56 Barcode Entry
Y57 User-defined string before local copy
Y58 User-defined string after local c opy
Y61 Setup for user-defined strings