user manual

Loading Paper

Phaser® 4510 Laser Printer

3-16

8. Insert the tray into the tray slot, and push the tray completely into the printer.

9. To use the current tray setup, press the OK button on the control panel. If you load a new

type of paper in the tray:

a. Select

Paper Tray Setup, and then press the OK button.

b. Select

Tray 2 Paper, Tray 3 Paper, or Tray 4 Paper, and then press the OK button.

c. Select

Use current setup if the correct paper type and size is displayed as the current

setup, or change the paper type:

■ Select Change setup, and then press the OK button.

■ Select the paper type from the list displayed, and then press the OK button.

■ Select the paper size, and then press the OK button.