user manual

Overview of Basic Steps
Phaser® 4510 Laser Printer
3-2
Overview of Basic Steps
1. Load paper in the tray.
2. Adjust the width and length guides to fit the paper.
3. If you are prompted by the control panel, either confirm the paper type and size or change
it as required.
4. From the software application, access the Print dialog box, and then select printing
options in the printer driver.
5. Send the job to the printer from the software application’s Print dialog box.
See also:
Loading Paper on page 3-7
Selecting Printing Options on page 3-18
Printing on Specialty Media on page 3-24