User Manual

2-18 Color Calibration

Calibrating the EX7750 with the DTP32 or DTP32HS

Using the DTP32 or DTP32HS, you can quickly measure color patches and

download these measurements to the EX7750 using ColorWise Pro Tools Calibrator.

NOTE: Before using ColorWise Pro Tools and the DTP32 to calibrate the EX7750,

follow the instructions on page A-12 for calibrating the DTP32 densitometer.

TO CALIBRATE THE EX7750 USING THE DTP32 OR DTP32HS

1. Start Calibrator.

For instructions on starting Calibrator, see page 2-6.

2. In the Select Measurement Method pane, choose X-Rite DTP32.

3. In the Check Print Settings pane, choose the desired calibration set.

Choose the appropriate calibration set for the mode and type of media that you will

use most often.

NOTE: For this calibration to take effect, the calibration set must be associated with one

or more output proﬁles. The default calibration set is already associated with the

default output proﬁle. You do not need to make any new associations.

4. Click Print in the Generate Measurement Page pane.

The Print Options dialog box appears.

5. Choose the appropriate options and click Print.

For Page Type, choose 21 or 34 Sorted Patches

Paper Size is automatically set to LTR/A4 for 21 Sorted Patches, or 11

x17/A3 for

34 Sorted Patches.