User Manual

A-11 Color Measurement Instruments

For a Mac OS computer, connect the 8-pin mini-DIN plug directly into the serial port

of the computer.

NOTE: For Mac OS computers with a USB port (for example, an iMac), you need an

adapter to connect the DTP32 to your computer. For information about supported

adapters, see the X-Rite, Inc. web site (www.x-rite.com).

4. Plug the small connector on the adapter cable into the side of the X-Rite DTP32 and

plug the AC adapter into a wall outlet.

5. Turn on the computer.

6. Calibrate the DTP32 (see the following section).

7. Calibrate the EX7750 using ColorWise Pro Tools and the DTP32 (see page 2-18).

Unused connector

Connect to serial port

AC adapter

Small connector