Multifunction Printer Advanced Features Guide
Table Of Contents
- Contents
- Using Printer Driver Options
- Printer Driver Features
- Selecting Which Paper to Use
- Printing Multiple Pages to a Single Sheet (N-Up)
- Printing Booklets
- Using Color Corrections
- Printing in Black and White
- Printing Separator Pages
- Printing Cover Pages
- Scaling
- Printing Watermarks
- Printing Mirror Images
- Creating and Saving Custom Sizes
- Job Completion Notification
- Printing Special Job Types
- Using Fonts
- Networking
- Managing Your Printer
- Printer Specifications
- Regulatory Information
- Product Recycling and Disposal
- Index
Printer Settings
Phaser® 8560MFP/8860MFP Multifunction Printer
4-12
Selecting Tray 2-N Mode
The Tray 2-N Mode setting specifies:
■ How Tray 2-N paper type and size are determined when you load paper in the tray but do
not select the paper type and size on the control panel.
To select the Tray 2-N mode setting, use one of the following options:
■ The printer’s control panel
■ CentreWare IS
Using the Control Panel
To select a Tray 2-N mode setting on the control panel:
1. Press the System button.
2. Select
Paper Tray Setup, and then press the OK button.
3. Select
Tray 2-N Mode, and then press the OK button.
4. Select the appropriate setting, and then press the OK button.
Using CentreWare IS
To select a Tray 2-N mode setting using CentreWare IS:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the General folder on the left navigation panel, and then select System Defaults.
5. Select the appropriate setting in the Tray 2-N Mode drop-down list.
6. Click the Save Changes button at the bottom of the page.
Setting Description
Dynamic
(Factory default setting)
■ Uses the settings from the next print job that prints from Tray 2-N to
determine the paper size and type.
Static
■ The paper size and type already set for Tray 2-N stay in effect.