User guide

Control Panel Menus
Phaser 6121MFP Multifunction Printer
User Guide
154
Fax Default Setup Menu
The Fax Default Setup menu contains the following sub menus.
Sub Menu Settings
Auto Redial Setup • Attempts: Specifies the number of redial attempts.
• Every: Specifies the time between redial attempts.
Fax COMM Setup • Tone/Pulse: Specifies either a tone or a pulse for the fax line. The
default is “0,” which is tone.
• Line Monitor: Specifies the volume (Off, Low, High) of the external
phone (line monitor). Allows you to hear the fax dialing and connecting.
• PSTN/PBX: Specifies the type of circuit used by the fax phone line,
either PSTN (default) or PBX. Select whether the connected telephone
wiring is a public switched telephone network (PSTN) or a private
branch exchange (PBX). For a PBX system, the prefix number (outside
line access number or extension number) can be specified. The set
prefix number will only be dialed if the pound (#) sign is entered before
the fax number when sending a fax.
Note: For South African customers: when making external calls
from a PBX, the access digit should be followed by a pause
dialing character (P) before dialing the external number. For
example: 9P1234567890.
• Reset to Default?: When selected, resets the Fax COMM settings back
to their original factory defaults.
Device Setup • Country: Specifies the country where the printer is located.
• Date & Time: Specifies the current date and time where the printer is
located.
• Date Format: Specifies date format: MM/DD/YYYY, DD/MM/YYYY, or
YYYY/MM/DD.
• Preset Units: Specifies the units of measurement the printer uses when
enlarging or reducing images (Phaser 6121MFP/N and /D printer
configurations only; the Preset Units setting for the Phaser 6121MFP/S
is located in the Copy Default menu).
• Device Fax Number: The printer’s fax number.
• Sender’s Name: The name that prints on the fax transmission report as
the person who sent the fax.
Fax Send Options • Lighten/Darken
• Quality Default
• Send Mode
•Header
• Reset to Default?
For details, see Fax Send Options Setup Menu on page 156.