User guide

Control Panel Menus
Phaser 6121MFP Multifunction Printer
User Guide
147
Copy Default Setup Menu
Special Copy Mode • ID Copy: Used for copying ID cards. The back and front of a document
are copied at full size onto one side of a single sheet of paper.
• None (Normal Copy)
• Poster Copy: The length and width of the copied document are each
enlarged 200% and are printed on four pages.
• Clone Copy: Repeat copying; used to copy small documents multiple
times onto one piece of larger paper.
Copy Default • Paper Default
• Original Doc Type
• Lighten/Darken
• Collate Default
•Sides Default
•Preset Units
For details, see Copy Default Setup Menu on page 147.
System Menu Provides accesses to the System Menu.
Menu Item Function
Paper Default
(Phaser 6121MFP/N and /D
printer configurations with the
optional 500-sheet feeder
installed.)
Specifies the default tray to use as the paper source for copies. If you do
not have Tray 2 installed (optional only for Phaser 6121MFP/N and /D
printer configurations), this setting will not be available.
Original Doc Type Specifies the type of content being copied from the original document:
• Mixed, Fine/Mixed: Text with images/photos.
• Photo, Fine/Photo: Photos only.
• Text, Fine/Text: Text only.
Lighten/Darken Specifies how light or dark the resulting copied image should be (also called
“copy density”).
Collate Default
(Phaser 6121MFP/N and /D
printer configurations only.)
Specifies whether copy sorting is on or off.
Sides Default
(Phaser 6121MFP/N and /D
printer configurations only.)
• Off: Double-sided copying is off.
• Long Edge Flip: Copied pages are printed so that they flip over along
the long edge of the paper.
• Short Edge Flip: Copied pages are printed so that they flip over along
the short edge of the paper.
Menu Item Contents