Administrator's Guide
Table Of Contents
- Contents
- Introduction
- Machine Connection
- Network Installation
- Printer Drivers
- Network Accounting
- Security
- SMart eSolutions
- CentreWare Internet Services
- Software Upgrade
- Troubleshooting
- Appendix
- Index
Security
Phaser 4622
System Administrator Guide
75
Xerox Secure Access
Overview
Administrators can configure the device so that users must be authenticated before they can access
specific services or areas.
Xerox Secure Access provides a means of authenticating users via an authentication server and
optional card reader.
Xerox Secure Access and Accounting
Secure Access can be enabled with Network Accounting to provide accounting functionality.
Information Checklist
1. Ensure the Xerox device is fully functional on the network.
Note TCP/IP and HTTP protocols must be configured so that Internet Services can be accessed.
2. Ensure the Xerox Secure Access authentication server is installed and configured with user
accounts.
Note Refer to the documentation with the authentication server to complete this task.
Note Contact your Xerox Sales Representative if you do not have the Xerox Secure Access Server.
3. If required, connect and configure your Secure Access Authentication device and card reader.
Note Attach the card reader to the left-hand side of the device.
Note Place the Secure Access Authentication device on the floor at the back of the device.
4. Ensure that SSL (Secure Sockets Layer) is configured on the Xerox device.
Note For further instructions, see Machine Digital Certificate Management & Trusted Certificate
Authorities on page 91.