Phaser® 3635MFP Quick Use Guide Version 3.2 25.01.
Phaser® 3635MFP Quick Use Guide
Thank you for choosing the Phaser 3635MFP. If you work through the procedures in this book in the order they are presented, you will successfully: Connect the Phaser 3635MFP Set-up the Phaser 3635MFP Install optional features Operate the Phaser 3635MFP Contents Install the Phaser 3635MFP ................................................................ 3 Switch On the Machine ....................................................................... 4 Your Phaser 3635MFP .......................................
For information about Safety, Regulatory Information, Environmental Compliance, Illegal Copies, and Product Recycling and Disposal, please refer to the relevant sections in the User Guide. If you require more detailed information about any of the features available on your device, please refer to the User Guide and the System Administration CD. For product support and information about ordering consumables and print media go to the Xerox website www.xerox.com/support.
Install the Phaser 3635MFP 2 Unpack the machine and any hardware options and locate the Installation Instructions. Follow the Installation Instructions to assemble the machine and hardware options. The result will be one of the following configurations.
Switch On the Machine Once the machine has been assembled it must be configured. This is done using the Product Enablement Key when the machine is switched on for the first time. 1 2 3 4 The Product Enablement Key is delivered in a plastic tube inside the box with the machine. The procedure to configure the machine is as follows: Locate the tube containing the Product Enablement Key. Remove the plastic card and Product Enablement Key carefully press out the key.
The Customer Support and Supplies Numbers screen is displayed. Enter the Customer Support Telephone Number and the Supplies Telephone Number and select Next. NOTE: This is for reference only. You may leave these fields blank if you do not have the information. 11 12 The next 4 screens will allow you to set the Date Format, Date, Clock Format and Time. Follow the instructions to enter the appropriate information and select Next on each screen. The Congratulations screen will be displayed.
Your Phaser 3635MFP 1 2 Control Panel: Touch Screen and Numeric Keypad Document Feeder: Used for scanning multiple documents. The Document Glass underneath is used for scanning single documents, bound documents etc. 2 1 3 Output Tray: Collects output 3 4 5 Paper Trays: Tray 1 is standard and Tray 2 is optional. 1 4 5 Bypass Tray: Used for nonstandard printing media Inside the Device There is a Customer Replaceable Unit in the device, the Toner Cartridge (6).
Control Panel Overview Job Status Services Machine Status Language Clear All Help Services Home Power Log In/Out Stop Display and Touch Screen Dial Pause Start Cancel Entry Numeric Keypad Item Description Services Home Displays the Services screen to enable selection of features. Services Use to access the feature options. Job Status Use to view the current job status and other job queues. Machine Status Use to access machine information, status, Serial Number and to print reports.
Item Description Dial Pause Enters a pause in a telephone number when transmitting a fax Clear All Press once to clear a current entry. Press twice to return to default settings. Interrupt Printing Use to interrupt the current job to run a more urgent job. Stop Stops the job in progress. Start Use to activate a job. Load Paper into the Paper Trays 1 2 3 Open the paper tray and load paper into the tray. Do NOT fill above the Max line.
........open the Document Feeder and place single documents face down on the Document Glass aligned with the rear left corner. English 3 NOTE: Documents are only scanned once even when several copies are selected.
Connecting to the Network Follow these instructions to connect the machine to an Ethernet TCP/IP network. If you are connecting your machine to a different type of network, or you wish to use other protocols, refer to the System Administration CD. Test the device 1 2 Before connecting the machine to your network, make sure that it is operating correctly as a copier. Place a document in the Document Feeder and make 3 copies.
2 On the Control Panel, press the Log In/Out button and then enter the Administrator passcode [1111] and select Enter. • Press the Machine Status button then select Tools > Connectivity and Network Setup > Advanced > Network Setting > Network Setup > TCP/ IP Options > TCP/IP Settings. • The allocated TCP/IP address is in the Name/Address field. Confirm that an IP address has been allocated and that it is an appropriate IP address for your network. NOTE: If the IP address starts with 169.xxx.xxx.
9 12 The static IP address is now set. Press the Log In/Out button and select Confirm to logout and close the Tools menu.
This procedure describes how to install Print Drivers using the Print Driver CD. The Print Drivers are on the Print Driver CD that was delivered with your Phaser 3635MFP. 1 2 3 You can use the CentreWare Print and Fax Drivers CD to install multiple components such as printer drivers, scan drivers, user documentation and PPDs (PostScript® Printer Description) at the same time. To use the installer, load the CentreWare Print and Fax Drivers CD-ROM delivered with your Phaser 3635MFP.
E-mail Setup If you wish to setup the E-mail service follow this procedure. If you do not want to setup this service at this time continue on to Fax Setup on page 16. NOTE: If you do not see the E-mail button on the Services Home screen, enable E-mail in the Tools Pathway. (Press Log In/Out > Machine Status > Passcode [1111] > Enter > Tools > User Interface > Service Enablements > E-mail > Enable.
7 8 9 10 11 12 Click either IP Address or Host Name and enter the Host Name or the IP Address and Port Number (1-65535) of the SMTP Server. The default Port is 25. Check Server Requires SMTP Authentication box if required. Enter the Login Name and Password. Click Apply to confirm your settings. From the Properties menu, Click Services > E-mail Settings > Defaults. To amend the settings on the E-mail Setup screen, Click Edit for each options group. When you have made your selections click Apply.
Fax Setup The Phaser 3635MFP/X configuration has Fax installed as standard. The Fax Kit will require setup when the machine is installed. Setting up the Fax Kit 1 2 3 4 5 6 7 8 9 10 11 16 Set up the Fax Kit using the instructions in the Kit. Connect the telephone line to the Line Line connector on the device. connector If you wish to attach a handset to the device, connect the handset to the Ext. connector. Press the Log In/Out button to enter the Tools pathway.
Installing Option Kits English This section provides instructions on how to install and configure optional features: • Network Accounting • Server Fax NOTE: For more instructions on installing and configuring Server Fax and Network Accounting, refer to the System Administration CD. Installing Option Kits 1 2 All the Option Kits are installed in the same way. Each kit will contain a Feature Enablement Key and instructions.
NOTE: Refer to the System Administration Guide for more information. Server Fax The Server Fax feature enables Users to send documents to one or more fax machines via the telephone network without having a dedicated telephone line connected to the machine This is achieved by connecting the machine to a network Fax Server which can manage fax transmissions throughout an organisation. Installing the kit 1 Install the kit. Refer to Installing Option Kits on page 17.
1 2 3 Load the documents to be copied either face up in the Document Feeder or face down to the rear left corner of the Document Glass. Press the Services Home button and then Copy. The Copy screen will be displayed. Select the required features using the Touch Screen. The features are shown in the table below.
NOTE: To confirm the Copy job, press the Job Status button on the Control Panel to display the Job Status screen. The queued copy job will be displayed in the queue.
Reduce / Enlarge Originals can be reduced or enlarged between 25% and 400%. To use this option, select the Copy tab. Select any one of the preset reduce/enlarge ratios or select More to access custom settings. Image quality adjustment You can enhance the copy quality of the output based on the type and quality of the original being scanned. To use this option, select the Image Quality tab. Original Type: Select the type of document to be copied, either Text, Text and Photo or Photo.
Printing a Document 1 2 3 Ensure that the correct Xerox Phaser 3635MFP printer driver has been installed on your PC. To install the print drivers refer to Install Print Drivers on page 13. You can also access the Print Drivers by referring to the CentreWare Print and Fax Services CD or you can download the latest versions from the Xerox website at www.xerox.com/support. Open the document to be printed. Click File > Print and select the Xerox Phaser 3635MFP from the list of printers displayed.
Rotate image This feature enables you to rotate the page through 180 degrees. To use this option, click the Advanced tab and click on Image Options. Select Enabled to rotate page images 180 degrees from their current orientation. Select Disable to turn the feature off. Saved settings Frequently (or rarely) used features of a print job can be saved with the Saved Settings option. This enables you to name, save, and recall almost all selectable features of a print job.
Sending a Fax NOTE: This feature is only available on the 3635MFP/X configuration. 1 2 3 Load the documents to be faxed either face down on the Document Glass or face up into the Document Feeder. Press the Services Home button and choose the Fax option. This displays the Fax screen. Enter the recipient’s fax number by: • Keypad Dial - select the Enter Number area on the touch screen and enter the number using the numeric keypad.
Delayed send This feature enables you to specify the time the fax is transmitted. This option can be used to delay transmission of a fax job to an off-peak period to reduce the cost of the call. To use this option, select the Fax Options tab. Select Fax Options > Delayed Send. Change the resolution The Resolution affects the appearance of the fax at the receiving fax terminal. To use this option, select the Fax options tab and choose from the available options under Resolution.
Network Scanning Network Scanning enables you to scan your hard copy documents and store them as electronic files. A file repository must be setup before using the Network Scanning feature. refer to the System Administration Guide for information on how to setup a file repository. Load the documents to be scanned either face down on the Document Glass or face up into the Document Feeder. Press the Services Home button on the Control Panel. Select the Network Scanning option.
Resolution Sets the scan settings to suit how the scanned image will be used 5 Advanced Settings Update Templates - Use a recently created or updated template before the system automatically adds it to the template list Layout Adjustment Filing Options File Format PDF, TIF, JPEG or XPS Press Start to scan your documents. NOTE: To confirm the scan job, press the Job Status button on the Control Panel to display the Job Status screen. The queued job will be displayed.
Additional Network Scanning Features Creating Scanning Templates Templates are used in network scanning to define the destination and scan settings for your scan job. Your workflow will be more efficient if you create specific templates for your most frequent scanning jobs. 1 2 3 New templates are based on the settings configured for the Default Template or you can copy and modify existing templates. Up to 250 templates can be displayed.
1 2 3 4 Load the documents to be E-mailed either face down on the Document Glass or face up into the Document Feeder. Press the Services Home button on the Control Panel. Select E-mail. Select From and enter the address you want to appear in the From field of the E-mail. NOTE: This field may have been preset by the Administrator and may not be editable. 5 6 Select New Recipients, enter the E-mail address of the recipient and select Add.
Enhance your Phaser’s productivity The Phaser 3635MFP is a powerful multi function device with many digital functions integrated into one sleek system. It is designed to support large workgroups in different production environments. You can do more with less and streamline your workflow with these productivity enhancing features.
The machine can be setup to reflect your office’s workflow. For example, the initial screen you see when you walk up to the machine can be either the Machine Status, Job Status, Services Home or one of the Services. Default settings for each of the Services can be set to your own requirements such as the default paper tray, customized reduction ratios and 2-sided copying to save on paper. To explore the options, access Tools and explore the Screen Defaults and System Settings.
Send paper documents as E-mail Scanned documents can be sent as E-mail attachments to a specified E-mail recipient or recipients. Access to the E-mail features is gained using the Services Home button on the Control Panel and the E-mail option on the display. This is an excellent feature for scanning documents for your own use. Simply select the E-mail feature, enter your own E-mail address and scan the document. Moments later it will be in your E-mail Inbox.
A variety of situations can effect the quality of your output. For optimal performance, ensure the guidelines in the User Guide are followed. The documentation and the fault messages on the machine help you to locate and resolve a problem easily. Some problems can be resolved by switching off and switching on your device. Wait approximately 20 seconds before switching the machine ON.
Paper jams The screen will indicate the location of the jam. • Follow the instructions on the display to clear the paper from the paper path. • Ensure that all jam clearance doors and covers are returned to their correct positions. NOTE: Jam Clearance areas may vary depending on your machine model and configuration. p Front cover clearance area Rear cover and duplex clearance areas Document jams The display will indicate when a document jam has occurred.
When using your device, detailed and timely help is available at your fingertips. You can access Help information and tips from a variety of sources. On the device Press Help at any time to access the online help screens. Messages, screen instructions and graphics provide additional information. Documentation Most answers to your questions will be provided by the documentation that is supplied on CDs with the Phaser 3635MFP. Alternatively you can access the documents from www.xerox.com/ support.
On CentreWare Internet Services Click Index to view the contents of the Internet Services site. Click Help to take you to the Xerox on-line support web site.
Disable the Banner Sheet in the Print Driver 1 2 3 4 5 6 7 8 Use the following instructions to disable the banner sheet from your device print driver on your PC. At your PC, select the Start menu, then select Printers and Faxes. Right click the required printer. Select Printing Preferences. Select the Advanced tab. Select Paper/Output and click on the + sign to expand the menu. Select Disabled from the Banner Sheet options. Select Apply. Select OK.
38 quick use guide
