Printer User Guide Phaser 2135

50
Phaser 2135 Color Printer
Light Vertical Lines
Light areas (without
color or the wrong
color) that streak the
page.
■
An LED bar is dirty.
■
If the problem occurs
in only one color, an
imaging drum may
be scratched, dirty or
damaged.
■
Clean each of the LED
bars
(a)
using the
cleaning pad supplied
with the toner
cartridge, or an alcohol
wipe from the
Cleaning Kit.
■
Replace the
corresponding
imaging drum.
Repeating Defects
Marks recur uniformly
at any of these evenly
spaced intervals:
■
Every 143 mm or
5.625 inches of any
color
■
The fuser may be
damaged.
■
Remove and inspect
the fuser; if damaged,
replace with a new
fuser.
■
Every 94 mm or 3.75
inches of same color
■
One of the rollers in
an imaging drum are
scratched or
damaged.
■
Replace the
corresponding
imaging drum.
■
Every 50 mm or 2.0
inches of same color
■
One of the rollers in
an imaging drum are
scratched or
damaged.
■
Replace the
corresponding
imaging drum.
■
Every 58 mm or 2.25
inches of same color
■
The transfer belt may
be damaged.
■
Replace the transfer
belt.
Print Defects and Potential Remedies (cont'd.)
Print Quality Problem Common Causes Potential Remedies
0748-52
0748-51
a
Print Quality