Printer User Guide Phaser 2135

34
Phaser 2135 Color Printer
1. Insert the envelopes (maximum capacity is 10):
a. Long end enters first.
b. Place the side to be printed face-up. (The dotted lines shown
below indicate the correct orientation of the flap beneath the
envelope.)
2. Adjust the Multi-Sheet Bypass Feeder guides for the width of your
envelopes.
3. Open the Side Output Tray on the left side of the printer.
4. The front panel prompts you to select the loaded media type and
size.
a. Press the Value buttons to select Envelopes. Press the Enter
button to save your selection.
b. Press the Value buttons to select the appropriate size. Press
the Enter button to save your selection.
5. Make a test print from your application to confirm the correct
orientation of your envelope.
6. Send the job to the printer.
0748-33
Special Media