Operation Manual

Fax · Sending Fax Manually¦ 37
EN
Short Dial: Press Ý. Select the desired entry using [ or with the numeric keys.
Recalling Sho rt Dial Number
Redial List
Redial List: Press @. Use [ to select an entry from the list of the dialled numbers.
Outgoing Cal ls
Caller List: Press and hold @ (at least two seconds). Use the [ to select an entry from the
list of callers.
Calls Recei ved
CLIP Prer equisite
Sending Fax Manually
1. Insert the document.
2. Enter the desired number using the numeric keypad or select a saved entry.
3. Press l.
4. Press o.
Getting Outside Line
PABX Systems
Private branch exchanges (PABX) are typical in many offices and some households. You must
dial an outside line access code in order to get a connection to the public telephone network
(PSTN) from a PABX.
Inserting Outside Line Access Code
Enter the outside line access code with which you reach the public telephone network before
you enter the desired number or select a stored entry. The outside line access code is usually
0.
Notice
Access Function
You can also load short dial entries by holding the respective number key pressed
(for at least two seconds).
Notice
Access Function
You can also load the redial list by pressing OK, 22 and OK.
Notice
Access Function
You can also load the caller list by pressing OK, 21 and OK.
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Identification (CLIP) must be activated for
your telephone connection (country and network dependent). The number and
name will not be shown if the caller suppresses his number.