Specifications

For more information on the Xerox Nuvera 200/288 EA and MX Production Systems,
please contact your Xerox representative, call (1-800-ASK-XEROX), or visit us online at
www.xerox.com.
©2009 Xerox Corporation. All rights reserved. Xerox® and the sphere of connectivity design and CentreWare®, FreeFlow®,
Xerox Nuvera® and VIPP® are trademarks of Xerox Corporation in the United States and/or other countries. Product appearance,
configuration availability, build status and/or specifications are subject to change without notice. In support of Xerox’s environmental
leadership goals, this model may contain some recycled components that are reconditioned. The Xerox Total Satisfaction Guarantee
applies to equipment under a Xerox warranty or a Full Service Maintenance Agreement and is subject to certain conditions. Opteron®
is a registered trademark of AMD, Inc. Windows® is a trademark of Microsoft Corporation. IBM® and Tivoli® are registered trademarks
of IBM, Inc. CA and Unicenter® are registered trademarks of Computer Associates, Inc. Adobe® and PostScript® are registered
trademarks of Adobe Systems, Inc. Sun®, Sun Microsystems® and Solaris® are registered trademarks of Sun Microsystems, Inc. in
the U.S. and/or other countries. PowerSquare™is a trademark of C.P. Bourg Inc. in the U.S. and/or other countries. CEM DocuConverter™
is a trademark of CEM S.p.A. 06/09
610P728630C
Xerox Nuvera
®
200/288 EA and MX Perfecting Production Systems
Oversized High Capacity Sheet-feed &
Insertion Modules*
2-tray•
Total 3,200 sheets per module•
Vacuum Air Shuttle feed system•
Optional second module available•
Tray 1: 1,600 sheets; 7.2" x 8" to 12.6" x 19.3" •
(182 mm x 203 mm to 320 mm x 491 mm)
Tray 2: 1,600 sheets; 7.2" x 8" to 12.6" x 19.3" •
(182 mm x 203 mm to 320 mm x 491 mm)
EA Media Latitude
– Coated: 60 lb text to 90 lb cover (90 – 250 gsm)
– Uncoated: 16 lb Bond to 90 lb cover (56 – 250 gsm)
MICR Media Latitude
– Coated: 140 gsm or less
– Uncoated: 56-250 gsm
Basic Finisher Module (BFM), Basic
Finisher Module Plus, and Basic Finisher
Module-Direct Connect (BFM-DC)*
Top tray: 250 sheet capacity (BFM only)•
Stacker: 3,000 sheet capacity; offset between •
sets or jobs
One or two staples, up to 100 sheets•
Size: 5.5" x 8.5" (A5 and SRA3, papers > 12" •
in cross process direction to top tray only)
Size: 7" x 10" to 12" x 18" (B5 to A3)•
BFM-DC is Document Finishing Architecture (DFA) •
compliant and provides direct connection to center-
registered finishing devices such as the Xerox Tape
Binder, C.P.Bourg (Watkiss) PowerSquare™ 200, and
CEM DocuConverter™
BFM-DC top tray: 5.7" – 19.3" (144 mm x 491 mm)•
Xerox
®
DS3500 Stacker
Replaces Finishing Transport Module•
Capacity of 3,500 sheets•
Document transport capability and full DFA to •
support Center or Edge registered output.
Sheet level jam recovery•
Unload while run/unload on demand functionality•
Interface to all in-line production finishing devices•
*Capacity based on 20 lb bond/75 gsm
Xerox Tape Binder
Sheets/Book size: 15 to 125 sheets •
(20 lb bond/75 gsm)
Tray capacity up to 1,500 sheets•
Binder Tape Strips: 100/cartridge (Black, Dark Blue •
and White)
Compatible with BFM-DC or Xerox DS3500 Stacker •
for in-line access to other finishing devices
Xerox Tape Binder Media Latitude
8.5" x 11"/A4•
Body/Insert Stock: 60-220 gsm uncoated –
Covers: 60-250 gsm uncoated, –
90-220 gsm coated
Transparencies –
Tabs up to 0.5" (12.5mm) wide•
Electrical Requirements
Dual 187-240 VAC (nominal), 50 Amp, •
50/60 Hz line service for North America
DS3500 and DFA Finishers will require –
additional line service and power
Dual 187-240 VAC (Nominal), 30 Amp •
(one for each Print Engine and Sheet
Enhancement Module) for Europe
Feeders and Finisher Modules –
will require additional power
DS3500 and DFA Finishers will require –
additional line power
Optional modules require standard •
100-240 VAC, 50/60 Hz line service
Power consumption: 1.316 kw (standby); •
8.300 kw (running)
Consult• Installation Planning Guide for
detailed power requirements
Environmental Requirements
Temperature: 50° to 87° F (10° to 31° C) •
Relative humidity: 15% to 85%; wet bulb •
limitation 77° F
Run mode heat emissions: configuration •
dependent; consult Installation Planning Guide
Certifications
Corporate Environmental Leadership •
Team policy of maintaining a waste-free
customer office
UL 60950-1, C-UL Approved for Canada •
CAN/CSA- C222.2 No. 60950-1-3 and IEC
60951-1
Physical Characteristics
Sheet Feed and Insertion Module
Width Depth Height Weight
31.7" 28" 44.6" 423 lbs.
805 mm 711.2 mm 1,133 mm 192 kg
Print Engine(s)
Width Depth Height Weight
88" 29" 61.6" 1,600 lbs.**
2,229 mm 737 mm 1,565 mm 726 kg**
Sheet Enhancement Module
Width Depth Height Weight
15" 28" 41.5" 168 lbs.
381 mm 711.2 mm 1,054 mm 76.2 kg
Basic Finisher Module
Width Depth Height Weight
33" 28" 44.6" 369 lbs.
838 mm 711.2 mm 1,133 mm 167.4 kg
Basic Finisher Module Plus & Basic Finisher
Module-Direct Connect
Width Depth Height Weight
49" 28" 44.6" 560 lbs.
1,233 mm 711.2 mm 1,133 mm 254 kg
Xerox DS3500 Stacker
Width Depth Height Weight
35" 28" 44.75" 480.6 lbs.
889 mm 711.2 mm 1,136.65 mm 218 kg
Xerox Tape Binder
Width Depth Height Weight
34.1" 28" 42.4" 352 lbs.
870 mm 708 mm 1080 mm 160 kg
**With consumables loaded.
Please reference the specification sheets for Xerox
FreeFlow
®
Makeready, FreeFlow
®
Process Manager
and FreeFlow
®
Web Services for complete details.