User's Manual

Dual DS5000:
Job integrity
29898
Dual DS5000 configuration: Last sheet not delivered to finisher 2 stack when
finisher 2 is full and the system switches to finisher 1 (closest to machine)
and the system continues printing to finisher 1. (Worse with duplex jobs)
Caveat: Turn off DS5000 cycle up feature or the customer has to remove last
sheet not on finisher 2 and put it on the stack in finisher 2.
Dual DS5000:
Job integrity
29929 Dual DS5000 configuration: Stacker changing before reaching the full/near
full state after an image quality adjustment or SFM jam. Potential job
integrity.
Caveat: Turn off DS5000 cycle up feature or when sheet delivery is diverted,
customer must remove all sheets delivered to the previous stacker.
Scanner Size
Sensing
35888 When redefining a zone using the Scanner Size Sensing feature, perform a
restart to make the change take affect.
Bypass jams 26715 Jobs sent to the "Bypass" output may jam if no external device profile is
enabled and online and there is a DFA device physically attached to the
Finishing Transport Module output. Workaround - when sending output to
External Finisher, select “System Specified” as the Output Location
Destination.
DS5000
keyboard
lockup
29850 The DS5000 becomes inoperable, due to keyboard lockup, after a jam in the
entrance of the DS5000 if FTM is cleared before the DS5000. POPO
required
Caveat: Turn off DS5000 cycle up feature or clear system from the right to
the left and drop DS5000 tray first.
4