User's Manual

Program a tab
job using 2-sided
originals for tab
images
To program a tab job using 2-sided originals with images for the tabs,
program as special page exceptions on tab stock:
Special page exception programming applies to the printed output;
exception pages do not affect scanned input. Programming a 1-sided
exception page for the tab image tells the system to print the page as 1-
sided output, which automatically forces the next image to be on the next
side 1 in the output. To successfully program the job:
1. Create a set of 1-sided originals to use in the SDDF using 2-
sided to 1-sided output. Remove the excess side 2 blanks from
the stack, load them in the SDDF, and program the job using 1-
sided to 2-sided output. (This is how the job would be run on a
5090.)
2. Scan the 2-sided input with all of the Copy job and exception
page programming. However, instead of printing the job, save
it. Then use the Editor feature to remove the excess blank
pages prior to printing the job.
Scan to File to a
USB thumb drive
To scan a job to USB:
1. One-time setup: Go to System Preferences, Save tab and set the
default Save Location to the root directory (“/”).
2. Insert the thumb drive into an available USB port.
3. Under Scan to File, select the [Save Location] button.
4. Select [Unix File System] from the drop down list.
5. Navigate to the directory “/USB” then to the subdirectory named for
the USB device.
6. Click [OK] and then scan the job.
Copy Save and Scan to File
Subtopic CQ# Description and Recommended Action
19-2100 faults 37414 For 144ppm Machines Only: Letter/A4 Copy jobs with > 150% R/E may
cause 19-2100 faults. As a work around, save the job and reprint it later.
Auto Proof –
Productivity Pack
only
30570 With Productivity Pack only: Copy jobs can be sent to any queue. Send a
copy job to a queue that does not have Auto Proof selected (or your output
will not be as expected). Scan To File jobs can only be directed to the
default queue. Do not select Auto Proof on the default queue or your output
will not be as expected.
Booklet job with
covers
System faults when processing a Booklet job with Covers. ‘System Error
occurred while attempting to process this job.’ After this error, some jobs
may fault to the same error. A Restart is required.
Workaround: For a Copy Save job with Booklet Imposition do not program
with Covers. If this is done, the system may have generated a processing
error and will need to be restarted.
Browsing to a
Solaris FTP
server
25264
Browsing for files to a Solaris FTP server doesn't list the directory links.
(e.g. you don't see /bin or /lib because they are links to /usr/bin and /usr/lib)
19