User's Manual

2
2 New Software
Capabilities
The following is a list of new capabilities enabled with version 9.3/10.3 software:
1. Customer enablement of the Xerox Nuvera Flexible Speed capability, which allows for
temporary speed upgrade licensing for the Nuvera 100/120/200 EA/MX Production
Systems, to help meet short-term print volume fluctuations. This capability allows 30, 60
or 90 day temporary speed upgrades for a Nuvera 100 to a 120 or 144, for a Nuvera 120
to a 144, or for a Nuvera 200 to a 288. Customers can enable this capability without the
aid of a Service technician.
Note
The Flexible Speed capability is not available on models with the Multifunction finisher.
2. The XPP Basic capability is now available for the Nuvera MX systems. See the section
Xerox Productivity Plus (XPP) in the User Guide and Training Aid for the benefits of this
capability.
3. A status indicator has been added, which indicates if the system is operating in the
[Alternate Set Mode] (this mode can help improve productivity on a Dual BFM
configuration). Please refer to the User Guide and Training Aid for more details on this
mode of operation.
4. Automatic Remote Software Patch Download. This capability allows a new software
patch to be automatically downloaded to a specific Nuvera
system or to a fleet of Nuvera
systems. This capability can be turned [On] or [Off]; it is delivered as [Off] by default - the
user must enable the feature through the Remote Service screen. Once enabled, if a patch
becomes available the machine will automatically download it. Then, on the next
scheduled Service call, the Service technician can install the patch.
5. Enhancements based on customer feedback include aiding the ease of Jam Clearance,
improve stock loading statuses, improved Pass Through Mode productivity on 200/288
systems for certain jobs, etc.
6. Enhancements to improve system up times include improved Service diagnostic routine
execution times and additional remote diagnostics.
Hints and Tips Guide 2-1