User's Manual

3 Release Issues

Issues resolved

The following is a list of Nuvera 9.2/10.2 issues that have been resolved and no longer apply to

Xerox Nuvera 9.3/10.3 systems:

• Tray Programming Reverts to Default Settings

• DS3500 finisher: a Job integrity issue may occur if the unload button is pressed just before

the first sheet is delivered

• Non-clearable Top Edge Sensor Fault

• Printer will boot up slowly when FFRPS is on and the user has a firewall turned on

• MICR Mode does not disable Edge Treatment

Hints and Tips Guide 3-1