User's Manual

Release Issues Xerox Nuvera
Issues remaining from previous release
Build Job
Description
11x17 and 8 1/2x14 build jobs are printing with second segment as 8.5x11 instead of 11x17.
Workaround
When using Build Job, please leave the paper selection set to APS before entering Build Job.
Once you are in Build Job you can change the paper selection to any stock you wish. You also
can leave it set to APS.
Data Overwrite feature may not complete if it is started while in
sleep Mode.
Description
If Data Overwrite is started while the machine is in sleep mode, the Data Overwrite may not
complete and the “Data overwrite in progress, please wait…” status message will continue to
display.
Workaround
Exit Power-save mode (this includes sleep mode) before starting Data Overwrite.
Cancelling Data Overwrite may not work properly
Description
When selecting [Cancel] in the final step of starting Data Overwrite (the 3
rd
window that
comes up with the status message, “Data overwrite in progress, please wait…”) may cause the
Data Overwrite feature to terminate incorrectly.
Workaround
When using Build Job, please leave the paper selection set to APS before entering Build Job.
Once you are in Build Job you can change the paper selection to any stock you wish. You also
can leave it set to APS.
3-2 Hints and Tips Guide