User's Manual

Xerox Nuvera™ 100/120/144 Digital Production System - Customer Expectations Document
- 5 -
Introduction
The purpose of this document is to help you understand the current features and capabilities of the Xerox
Nuvera™ 100/120/144 Digital Production System (DPS). Review of this material is recommended prior to
your signing an order for a Xerox Nuvera™ 100/120/144 Digital Production System.
This document addresses high-level expectations. Additional details are provided in the training
documentation.
Product Overview
The Xerox Nuvera™ 100/120/144 Digital Production System sets a new benchmark in the world of on-
demand printing. It is a networked printing system comprised of multiple modules. The Xerox FreeFlow™
Document Services Platform (FreeFlow™ DocuSP®) is integrated into the Printer Module. The printer
module may be acquired with simplex, letter size / A4 speeds of 100, 120 or 144 impressions per minute.
The optional Scanner Module with 300 sheet input tray scans at 120 images per minute, simplex or duplex
at 600 x 600 dpi. Two Sheet Feed Modules (SFM's) are available, one with 4 trays, the other with 2 trays
having more large-format capacity. An SFM may also be installed after the printer module and used as an
inserter. The Xerox Nuvera™ DPS paper latitude includes coated stocks. The Printer module prints at
4800 x 600 dpi utilizing a state of the art dual beam laser raster output scanner (ROS) with dedicated
image processing hardware. The Finishing Transport Module (FTM) provides the capability to interface
with a variety of production inline document finishing architecture (DFA) finishing devices. The Basic
Finishing Module (BFM) stacks and provides stapling in single or dual positions. Up to two BFM modules
(one a BFM Plus) can be used to enable continuous running with unload while run capability. A BFM Plus
module can also be used in tandem with the FTM to enable inline DFA finishing.
Crucial Performance Expectations
The Xerox Nuvera™ 100/120/144 Digital Production System is a “clean-sheet” design utilizing innovative
technologies. It is the new base platform for Xerox monochrome products.
The following expectations should be explicitly set. Please see the appropriate section of this CED for
further detail.
Availability
The Xerox Nuvera™ 100/120/144 Digital Production System will be available on a monthly average 92
– 95%of the time.
• Availability is defined as all of the time the machine is not being serviced, or waiting for service.
• Given similar service coverage, DocuTech® / DocuPrint® availability averages up to 95%.
Power Up takes approximately 1 minute longer to complete than in the previous release (about 6½ to 7
minutes total on the current DocuSP® FreeFlow
TM
Controller (x86)).
Media Capability
• The Xerox Nuvera Digital Production system images on a wide range of both coated and uncoated
papers. Results may vary depending on the paper used. We are pleased to consult with you to help
you maximize your objectives.
• Coated papers less than 80 lb text (120 gsm) may experience degraded performance and are not
recommended for high area coverage, for example, greater than 25%.
• Media capabilities vary with finishing options. Please refer to the System Media Capability table in
this document. (p. 8)
• Reinforced stocks should be limited to 90 sheets loaded in a tray at one time
• Jobs must be run with straight (not reverse) collated tabs.
• Envelopes