User's Manual

Xerox Nuvera™ 100/120/144 Digital Production System - Customer Expectations Document
- 39 -
Finishing Transport Module (FTM)
The Finishing Transport Module enables inline finishing by providing document
transport capability and full DFA support to DFA compliant finishing devices.
Key Features include:
• Dual DFA enabled output heights
•
Center or Edge registered output delivery
•
Varying transport speeds to maximize throughput capability
•
Built-in rotator to maintain productivity when finishing smaller size applications.
Please refer to the Finishing Transport Module (FTM) Solutions Planning
Guide for further site planning information, system dependencies, limitations,
valid configurations and device specifications.
Dimensions Finishing Transport Module (FTM)
Width x Depth x Height 35” x 28” x 44.6” (889mm x 711.2mm x 1133mm)
Bypass Output Heights 34” (860mm) & 40.3” (1024mm)
Weight 389 lbs. (176 kg)
Clearance: Operator Minimum 24” in front of module
Clearance: Service Minimum 30” on all sides
Finishing Transport Module (FTM)
Electrical &
Environmental
Minimum Maximum
Temperature Range
41° F (5° C) 95° F (35° C)
Humidity Range 10% RH 85% RH
Altitude - 100 ft (31m) 40,000 ft (123192m)
Sound Emission LpA 57 dBs
Power
120 VAC ± 10%, 60 Hz, 7.5 A
220 VAC ± 10%, 50 Hz, 3.5 A
Media Latitude &
Capacity
Finishing Transport Module (FTM)
Stock Weight Range
Uncoated: 40 lb. text to 90 lb. cover (56 to 250 gsm)
Coated: dependent on the finishing device attached
Top Tray 7” x 10” to 12.6” x 18.5” (177.8mm x 254mm to 320mm x 470mm)
Bypass with
Rotation
7” x 10” to 12.6” x 14.3” (177.8mm x 254mm to 320mm x 363.2mm)
Stock Size Range
Bypass without
Rotation
7” x 10” to 12.6” x 18.5” (177.8mm x 254mm to 320mm x 470mm)
Top Tray Capacity 250 (20 lb. bond / 75 gsm)