User's Manual

Xerox Nuvera™ 100/120/144 Digital Production System - Customer Expectations Document
- 11 -
System Product Specifications Overview
Optimum Product Performance
Print Volume Range
The Xerox Nuvera™ 100/120/144 Digital Production System is designed for an Average Monthly Print
Volume (AMPV).
System AMPV Conditions
Xerox Nuvera™ 100/120/144
Digital Production System
100K – 1.5M (PS 100/120)
150 K – 2.0M (PS 144)
8.5 in. x 11 in./A4
Maximum Duty Cycle: Up to 3.7 million prints per month with the Xerox Nuvera™ 144.
Duty Cycle is defined as:
The maximum recommended monthly copy / print volume support under standard vendor supplied
service (3 x 7 shift coverage). This defines the upper end of expected customer volume band for the
device.
The Customer should consider higher volume machines or multiple machines if average monthly
volume approaches Duty Cycle on a constant basis.
Prints between service calls on a digital Xerox Nuvera™ DPS are dependent on customer
requirements for volume, applications, and throughput material. Specific customer requirements for
Image Quality may further impact the number of service calls. Xerox Nuvera™ trained operators can
optimize performance output and minimize service calls.
Environmental Factors
Environmental Factor Minimum Maximum
Temperature 50
o
F (10
o
C)
(Tested to 60° F (15.6
o
C))
90
o
F (32.2
o
C)
(Tested to 80° F (26.7
o
C))
Humidity 15% RH
(Tested to 15%)
85% RH
(Tested to 80%)
Heat Emission (approximate)
(SFM, Print Engine, BFM)
2,470 BTU / HR
(Standby)
18,738 BTU / HR
(Running)
Power Consumption (approximate) 0.723 kw
(Standby)
5.885 kw
(Running)
SFM / PM / BFM 39.2 dBA - Standby 66.1 dBA - Maximum
63.1 dBA - Printing
SFM / PM / FTM 41.5 dBA - Standby 67.5 dBA - Maximum
63.5 dBA - Printing
Noise
(Approximate
sound pressure
level with 9
microphone
average) SFM / PM / FTM / DS5000 54.8 dBA - Standby 69.9 dBA - Maximum
66.2 dBA - Printing
Altitude (above sea level) 0 10,000 ft.
Nominal Voltage (Processor) 200 240