The Document Company XEROX DocuPrint C8 Ink Jet Printer
Xerox Corporation ©1998 by Xerox Corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted. Xerox and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Xerox and all Xerox products mentioned in this publication are registered trademarks of the Xerox Corporation and used by Xerox Canada Ltd. as a registered user.
Customer Support To resolve problems with your printer, follow the suggestions that are provided in Chapter 4, Troubleshooting the Printer. If you are unable to solve a DocuPrint C8 problem using this guide or the online Help, call the Xerox Customer Support Center at 1-800-832-6979. Before calling, make sure you have the following information: • C8 serial number, which is located next to the parallel port on the back of the printer.
If you require additional information about Xerox and Xerox products, visit the Xerox website at: http://WWW.XEROX.
Contents Customer Support ....................................................................................iii Contents........................................................................................................ i Introduction................................................................................................. 1 Generating Floppy Disks from your CD ................................................... 2 Safety notes....................................................................
The Image Quality Property Page ........................................................... 31 The About Page....................................................................................... 34 The Status Property Page ........................................................................ 35 The Maintenance Property Page ............................................................. 38 Checking the documents in the print queue.............................................
Cartridges and print heads ...................................................................... 66 Selecting plain paper............................................................................... 66 Selecting specialty print media ............................................................... 67 Selecting labels ....................................................................................... 68 Selecting transparencies..........................................................................
iv
Introduction Chapter 1 The DocuPrint C8 printer is a fast, high quality, thermal ink jet printer designed for both color and black and white applications. Featuring a compact lightweight design, the printer is ideally suited for use in your office or at home. The DocuPrint C8 printer connects easily to your personal computer.
Generating Floppy Disks from your CD With your DocuPrint C8 printer you will receive a CD containing the software for operating your printer in connection with your PC. For your convenience, it is possible for you to copy the Windows 95/98 Printer Driver onto a floppy disk using the instructions provided below: • • • • • Hold down the shift key and insert the DocuPrint C8 CD into the CD-ROM drive; holding down the shift key suspends the Auto Start of the installer.
3. 4. 5. 6. 7. 8. Place your printer on a firm, solid surface. If you put it on an unsteady surface, it might fall and become damaged. If you place the printer on a soft surface, such as a rug, sofa, or bed, the vents may be blocked, causing it to overheat. Do not put the printer on or near a heat source, such as a radiator or heat register. If you put the printer in any kind of enclosure, make sure it is well ventilated. Do not use your printer near water, or spill liquid of any kind into it.
The use of an extension cord or power strip with this printer is not recommended. If you are using an extension cord or power strip with the printer, make sure that the total of the amperes required by all of the equipment on the extension is less than the extension’s rating. Generally, the total ratings of all equipment plugged into any one power line should not exceed 15 amperes. Do not exceed this unless you know that the power line your equipment is plugged into has a rating above 15 amperes. 10.
11. Aside from the routine maintenance described in your printer documentation, do not try to service the printer yourself. Opening the cover may expose you to shocks or other hazards. Do not make any adjustments other than those described in the documentation, as you might cause damage requiring extensive repair work. 12. If anything happens that indicates that your printer is not working properly or has been damaged, unplug it immediately and have your printer serviced.
13. The CE marking applied to this product symbolizes Xerox’s declaration of conformity with the following applicable directives of the European Union as of the dates indicated. • January 1, 1995—Council Directive 73/23/EEC amended by Council Directive 93/68/EEC, Approximation of the laws of the member states related to low voltage equipment. • January 1, 1996—Council Directive 89/336/EEC, Approximation of the laws of the member states related to electromagnetic compatibility.
Printer Registration To ensure that your printer is registered, please take a moment to register this product. Directions are provided below. The preferred registration method is through online registration; however, each of these methods will enable you to register your product. • On-line registration • FAX number 1-800-594-5023 • Call 1-800-TEAM XRX (1-800-832-6979) • Mail in the registration card.
Chapter 2 Understanding the printer’s features This chapter illustrates the parts of the DocuPrint C8, explains the front panel control Printer Control button and LED light, and lists the printer specifications.
Hardware features Review the following illustrations to familiarize yourself with the printer’s parts.
Inside view of DocuPrint C8 Printer Star Wheel Bar Green Cartridge Lock Lever Print Head and color ink Top view of DocuPrint C8 Printer 10
Back view of DocuPrint C8 Printer Parallel interface Serial Number Power connection 11
Control panel Operation The DocuPrint C8 control panel has one button and one light (LED). The Printer Control (green) button controls printer functions. The one LED light displays the condition of the printer. Normal Printer Operation LED Off • To center the print head so you can replace a print cartridge – Press and hold the Printer Control button for at least 2 seconds. The print head will move to the center of the printer.
LED On Continuously A continuously lit LED can indicate any of the following error conditions: • Out of paper – Fill the paper tray. Press and release the Printer Control button to feed paper. • Paper Jam – Press and hold the Printer Control button for at least 2 seconds to clear the jam. If the paper fails to come out, follow the jam clearance procedure described on the Quick Start Card. • Incorrect Print Head Installed – Press and release the Printer Control button to center the print head.
Printer specifications Feature Specification Print speed Black: Up to 5 ppm (draft mode) Color: Up to 2.
Feature Specification Paper tray capacity 100 sheets 75 g/m² (20 lb.) paper Paper output shelf capacity 50 sheets 75 g/m² (20 lb.) paper Paper size Automatic feed: Letter, Legal, A4, A5, B5, 8 x 10, Executive Envelopes: #10, DL, 7 ¾ Banner feed: A4 x 5, Letter x 5 Paper weight 60 – 163 g/m² plain paper: (16 – 43 lb.
System Requirements Operating System Windows 95/98, Windows NT4.0 Random Access Memory Minimum 8 MB 16MB Recommended Hard Disk Space 20 MB CPU 486-DX66 MHz Note: The use of bypass peripherals (i.e. a switch box or scanner) is not recommended. Use a direct connection to the parallel port of the computer.
Printable area / Margins A Recommended 5.0 mm (0.21”) Possible 5.0 mm (0.21”) B 5.0 mm (0.21”) 5.0 mm (0.21”) C 5.0 mm (0.21”) 5.0 mm (0.21”) D 18.0 mm (0.71”) 12.7mm (0.
Using the printer settings Chapter 3 Using the DocuPrint C8 printer driver software, you can select from a variety of settings when printing documents. This chapter describes the printer settings you can select and how to check the status of the documents sent to the printer. This section covers features for Windows 95/98, and Windows NT 4.0. The Windows NT 4.0 driver is not included with your printer but can be downloaded from the web, following the directions below. Downloading the Windows NT 4.
• Click on Drivers. • In the Select a product field, highlight DocuPrint C8. 3. In the Operating System field, highlight Windows NT 4.0. 4. In the Language field, select US English or French. 5. Click on the Search button. 6. A large title appears: here is what we found. Look at the table titled: Drivers/PPDs Table. 8. • In the File Name column of this table, click on C8NT.EXE (TBD) • A File Download dialog box appears. Click on the radio button titled Save this program to disk.
Accessing printer settings You can access the printer settings from a Windows software application or from the Printers folder. From a Windows software application: Click Print from the File menu. In the Print dialog box, click Properties (or Setup). From the Printers folder for Windows 95/98: In Windows 95/98, click the Start button on the Task Bar, point to Settings, and click Printers. Click the DocuPrint C8 icon with the right mouse button, and then click Properties.
The Paper/Output Property Page The Paper/Output property page provides the following settings: Copies Specifies the number of copies to print. The valid range is 1 to 99. Orientation These radio buttons allow the user to select the paper orientation: Portrait (vertical orientation) or Landscape (horizontal orientation). The icon to the left of the buttons changes to match the selection. Collate Arranges, in sequential order, multiple copies of the same document.
Print with cartridge Specifies the print cartridge required for the current print job. This setting lets you send several documents to the printer and specify the type of print cartridge to use for each document. If the appropriate print cartridge is not installed when the print job begins, you will receive a message to install the correct cartridge. Print document as 22 • Now in printer: Indicates the print job is to be printed with the print cartridge that is already installed in the printer.
Paper size Specify the paper size to be used for the current print job. The Paper size pull-down menu lists sizes of paper on which to print. All choices are always available. The page icon to the left of the menu changes to match the selection. Refer to OnLine Help for a complete listing of choices. Paper type Selects the type of paper to print on.
• Saved settings Save As button Photo quality: Resolution is 1200 x 600 dpi on photo quality glossy paper. (Color/Photo Cartridge only). Specifies the printer settings file to use for the print job. Four files are provided or you can create your own file. Refer to On-Line Help for a complete listing of settings within these four preset choices. 1. Draft memo 2. Presentation transparency 3. Photograph 4.
Delete button Deletes the currently selected Saved setting file. Status button Displays the Status window. If the Status window is already running, it will be brought to the foreground. Default All Sets all controls on all property pages to their factory defaults. This function is the same as: Printer defaults from the Saved settings control. (See Saved Settings, above). Device mimic (printer illustration in lower left corner) This is a bitmap image of the printer.
The Page Layout Property Page The Page Layout property page enables you to print one image on multiple pages. It also allows several pages to be printed on a single sheet. The graphic to the left of the control is updated to reflect your specific layout selection. There are three layout options: • Poster: The poster feature takes each original image and magnifies it to print on the chosen number of pages. Note: The Poster feature in the Page Layout property page is not available for Windows NT 4.0.
Poster Number of sheets This determines how many pages each original image is expanded to. The list contains 4, 9, and 16. Print crop marks When checked, a black border will be printed at the edge of the printable area of each expanded page. Print sheets The box displays the page numbers that will be printed from the total job. The default is that all sheets will be printed. The user can select any combination of sheets using the Select button.
Select Sheets Use this dialog to select expanded Poster sheets to print. The features in Select Sheets are: Clear Deselects all the sheets. The dialog box remains open. All Selects all the sheets. The dialog box remains open. OK Saves the current selections and exits the dialog box. Cancel Exit without saving your selections. Help Displays help for this dialog box. Note: This setting will remain in effect until it is changed.
Multiple-up option The Multiple-up feature enables placement of multiple images on one document. If you select Multiple-up in the Page Layout property page, the following controls appear: Images per sheet This selection determines how many images are condensed and printed on one page. The available choices are 2, 3, 4, and 8. Print borders Click on the check box to print a black border around each condensed image. The icon will reflect the border choice.
Mirror Image In the center of the Page Layout property page, is an icon and check box for Mirror Image. The printed image is flipped horizontally (left to right). This setting is automatically selected when you choose Paper type: Ironon transfer from the Paper/Output Property sheet. The icon to the left of the check box is updated based on your selection.
The Image Quality Property Page The Image Quality property page provides a large graphic that estimates how Lighten/Darken, Contrast, and saturation of Red, Green, and Blue affect the document. (However, the graphic does not change when you select ImageFix.) These are the Image Quality property page features: Halftone type This field is informational only. The user cannot select the type of halftone to use directly. The software selects the halftone based on the quality mode and Print mode selected.
ImageFix Changes the document image to improve sharpness, contrast, and color. For example, ImageFix will correct pictures and photographs that have poor color balance. This does not work on all bitmaps, and it can slow processing of the document. Note: ImageFix is not available for Windows NT 4.0. Lighten/Darken Increasing the value of Lighten/Darken creates a lighter print; decreasing the value creates a darker print. The large bitmap to the left reflects these changes.
Red Move the Red scrollbar to the left or right to decrease or increase the amount of red in your print. The large bitmap to the left reflects these changes. This control is disabled when Print document as is set to Greyscale. Green Move the Green scrollbar to the left or right to decrease or increase the amount of green in your print. The large bitmap to the left reflects these changes. This control is disabled when Print document as is set to Greyscale.
The About Page This tab gives important information concerning the version of the software and copyright dates. You should have the software version number available for the Xerox Customer Support Center when you call for assistance.
The Status Property Page The Status property page provides you with printer status information, including the level of ink in the print cartridge(s). The Status property page also shows the progress of the current print job. By default, the Status property page opens automatically while printing a document. If the printer is idle, you can check its status by doing one of the following: • Go to the Paper/Output property page and click the Status button.
Note: In Windows NT 4.0, click the Start button, point to Settings, and click Printers. Click the DocuPrint C8 icon with the right mouse button. With the left mouse button, click Document Defaults. This takes you to the Paper/Output Property Page. Click the Status button. These are the Status property page features and settings: Information area This area is at the top of the screen and consists of an icon and a message area. The message area is used to report device warnings and errors.
If an ink cartridge is empty, missing, or installed incorrectly, an error symbol appears (a mini red circle with a white X). Now printing Indicates the name of the job being printed. The actual text is supplied by the application that requested the print job. Page Indicates which page is currently being printed and the total number of pages submitted for printing. Copy Indicates which copy is being printed and the total number of copies requested.
The Maintenance Property Page The Maintenance property page provides you with printer maintenance capabilities. If the printer is idle, you can open the Maintenance Property page by doing one of the following: • Go to the Paper/Output property page and click the Status button, then click the Maintenance tab. • To display the Status window, click the Start button, point to Settings, and click Printers. Click the DocuPrint C8 icon with the right mouse button.
All the buttons on the Maintenance Property Page are disabled if a job is being printed. These are the Maintenance property page features and settings: Information area This area is at the top of the screen and consists of an icon and a message area. The message area is used to report device warnings and errors. The text in the message area reports low ink, out of ink, out of paper, wrong print head, etc., as well as information about the problem.
If an ink cartridge is empty, missing, or installed incorrectly, an error symbol appears (a mini red circle with a white X). Change Cartridge Moves the print cartridge to the center position so you can remove it. A dialog box gives additional instructions for removing the cartridge. If the print cartridge is not in the center of the carriage, click the Cancel button and invoke this dialog box again. Select what you are installing from the displayed options.
• New print cartridge Select this option if you are installing a print cartridge that has never been used before, for example, one you have just purchased and are installing for the first time. Once you have made the appropriate choice, click OK. The Installation Complete dialog box will then appear. After the installation is complete, click OK. The print head will move back to the left (its home position). The cartridge will be prepared for printing. Clean Cleans the currently installed print cartridge.
If a pattern other than zero has the straightest lines, then select that pattern on the dialog box. Select Print the Alignment Test Pattern if you want to verify the adjustment, then click Align. If you are not verifying the adjustment, click Done. If none of the patterns has straight lines, then select the pattern that is the closest (this should be -4 or +4). Make sure Print the Alignment Test Pattern is selected and then click Align.
Checking the documents in the print queue The DocuPrint C8 print queue shows the documents currently being printed or waiting to be printed. 1. To view the print queue, do one of the following. • Click the Windows Start button, point to Settings, and click Printers. Double-click the DocuPrint C8 icon. • Click the DocuPrint C8 icon on the taskbar. The DocuPrint C8 window lists the print jobs pending on the printer and the status of each job. 2. 3.
Chapter 4 Troubleshooting the printer This chapter describes common printer problems that may occur and provides the recommended solutions. Follow the suggested solutions to correct the problem. If the problem continues, contact Xerox Customer Support. The Xerox Customer Support Center telephone number in the United States and Canada is: 1-800-TEAM XRX (1-800-832-6979) Call from a telephone near your PC and the printer. Make sure that both your PC and your printer are turned on.
The printed document does not match the selected printer settings Cause Suggested Solution Some software applications override the settings selected on the DocuPrint C8 property pages. Choose the printer settings from the application. Previously selected printer settings are used to print the document. Check the selected settings on the DocuPrint C8 property pages.
The printed document is blank Cause Suggested Solution There may be a problem with the print head, printer cable, or your PC. Print a Test print by unplugging the power cord from the rear of the unit; then, while pressing the Printer Control button, reinsert the power cord into the back of the unit and continue to hold the Printer Control button until the print head starts to move. If the Test print is good, check the printer cable or your PC.
Cause Suggested Solution • Remove print head and then remove ink cartridges. Check to see if they are empty. Check the ink output and pin hole vents. Reinsert cartridges, making sure you hear a click, reinstall print head. • If necessary, contact the Xerox Customer Support Center.
The document prints slowly 48 Cause Suggested Solution The Print Quality is set to High quality. On the Paper/Output property page, set the Print quality to Draft or Normal. ImageFix is selected. On the Image Quality property page, click ImageFix to remove the check mark. The Temp (Temporary) Folder on your hard drive may contain too many files. Delete *.tmp and *.prn files from the Temp Folder. Windows 95/98 stores temporary files in C:\Windows\Temp.
The document sent to the printer does not print Cause Suggested Solution The printer cable is not connected properly. Unplug the power source. Make sure the printer cable is securely connected to the printer and your PC. Reconnect the power source. The printer is not mapped to the local port. Map the printer to LPT1. Use the Details property page to map the LPT printer port. Click the Start button, point to Settings, and click Printers.
The Front Panel LED is on continuously Cause Suggested Solution The printer is out of paper. Add paper to the paper tray. Then, press and release the Printer Control (green) button. The print head is not installed correctly. Press and release the Printer Control (green) button to center the print carriage. Remove, then reinstall the print head. Press and release the Printer Control button to return to the home position. A carriage position error occurred.
An ink cartridge is empty, or the wrong brand of ink cartridge is installed. Click the Change button on the Maintenance property page, and then follow the instructions to replace the ink cartridge. An ink cartridge is not installed correctly. Press and release the Printer Control (green) button to center the print carriage. Open the printer cover and snap each ink cartridge into position by pressing the cartridge down and into the print head.
The Front Panel LED is blinking slowly Cause Suggested Solution There is a low ink condition. Install a new color or black ink cartridge. The Front Panel LED is blinking intermittently 52 Cause Suggested Solution There is data in the buffer. Press and release the Printer Control (green) button to release the data in the buffer and begin printing.
The print is blurry or jagged vertical lines appear Cause Suggested Solution The paper used is not recommended for the printer. Certain papers (recycled paper) may cause poor quality output. Best results will be achieved by using paper developed for ink jet printers. The color print head needs to be cleaned. Click the Cartridge Clean button in the Maintenance property page. After cleaning the ink cartridge, run a test print. If the print is still blurry, repeat the above process five more times.
The printed image is clipped or off the edge of the media 54 Cause Suggested Solution The document margins may exceed the printer margins. Change the document margins in the application that you are using to be within the recommended printable area. Make sure the margins are equal to or wider than these margins: Top, left, right margins: 5 mm Bottom margin: 18 mm The media type and size may not be correct. Make sure you selected the correct Media size on the Paper/Output property page.
Extra characters, dashes, or lines appear on the printed pages Cause Suggested Solution The printer cable is too long. Use a printer cable that is less than six feet long. Port Monitoring software is active from a device previously connected to the printer (parallel) port. Remove all previously installed printer drivers or devices from your PC. Printer buffer contains data from previous print job Unplug printer power cord to purge printer buffer. Restart PC. Reconnect printer power cord.
White horizontal lines and streaks of the wrong color appear on the printed pages 56 Cause Suggested Solution An ink cartridge is empty. Replace the ink cartridge. Click the Change button on Maintenance property page, and then follow the instructions on the Quick Reference Guide for replacing the ink cartridge. An ink cartridge is clogged or defective, or the print head needs to be cleaned. Click the Cartridge Clean button in the Maintenance property page.
The print is faint or missing Cause Suggested Solution The paper used is not recommended for the printer. Certain papers (recycled paper) may cause poor quality output. Best results will be achieved be using paper developed for ink jet printers. An ink cartridge is empty. Replace the ink cartridge. Click the Change button on the Printer property page, and then follow the instructions on the Quick Reference Guide for replacing the ink cartridge.
Ink is smeared on the printed pages 58 Cause Suggested Solution The printer is printing outside the printable area. Change the document margins in the application that you are using to be within the recommended printable area. Make sure the margins are equal to or wider than these margins: Top, left, right margins: 5 mm Bottom margin: 18 mm The printer cover is open while printing. Close the printer cover. Paper is not completely exiting the printer because the star wheel assembly bar is disengaged.
The print quality of transparencies is poor Cause Suggested Solution The wrong type of transparencies was used. Use transparencies made for ink jet printers only. Transparency is not selected for the Paper Type option on the Paper/Output property page. Make sure Transparency is the selected Paper Type option on the Paper/Output property page.
Color variations appear in large areas of color Cause Suggested Solution The print cartridge needs aligning. Align the print cartridge. Click the Align button on the Maintenance property page, and then follow the instructions displayed on the screen. Align the print cartridge. Click the Align button on the Maintenance property page, and then follow the instructions displayed on the screen. There is a bi-directional error. 60 The Print quality option is set to Draft.
The paper is not feeding properly Cause Suggested Solution The paper is not correctly positioned between the paper guides. Align the left edge of the paper with the left paper guide. Slide the right paper guide lever until it rests lightly against the right edge of the paper. The paper is not loaded properly. Remove the paper from the paper tray, fan the sheets, and then reload the paper stack. Do not load more than 100 sheets in the paper tray. If misfeeds continue, load new paper.
The paper does not stack neatly in the paper output shelf 62 Cause Suggested Solution There is not enough clearance above the paper output shelf. Place a sheet of paper in the paper output shelf. Check the clearance above the top of the sheet; there should be two inches of clearance. The star wheel assembly bar is disengaged. Open the printer cover. Reinstall the star wheel bar by pushing down on each end of the bar until it snaps into position.
Packing the printer for return to a Service Center Should you need to return the printer for servicing, follow the packing instructions in this section Note: Do not ship the power cord, printer cable, printer driver disks, user guide, print head and ink cartridges, or storage box unless instructed to do so. 1. Remove the print cartridge and place it in the print head storage box. 2. Close the printer cover and remove the paper output shelf. 3. Disconnect the power cord and the printer cable. 4.
9. Add enough loose fill to completely surround and cover the printer. Compress the fill to ensure minimal movement. 10. Securely tape and seal the box. The illustration below shows an example of how to pack the printer. Outside box (275 lb. Printer Two layers 12.3 mm Minimum 50.
Chapter 5 Selecting and ordering supplies To order supplies for your DocuPrint C8, contact your local retailer. If your retailer is out of stock, you can order supplies through Xerox: In the United States, call 1-800-822-2200. In Canada, call 1-800-668-0199 (English-speaking) or 1-800-668-0133 (French-speaking).
Cartridges and print heads The following supplies are available for your printer: Item Description Reorder number Color ink cartridges Black Black ink cartridge 8R7994 Cyan Cyan ink cartridge 8R7661 Magenta Magenta ink cartridge 8R7662 Yellow Yellow ink cartridge 8R7663 Color/Photo print head Black housing that holds the color ink cartridges 8R7999 High capacity black cartridge Fast, black-only ink cartridge 8R7638 Selecting plain paper Most plain paper will work well in your Xerox prin
Selecting specialty print media Your Xerox printer will accept a wide range of specialty print media to satisfy all your printing needs. These include: • transparencies • high-quality matte paper, glossy paper • greeting cards • fabric transfer sheets For best results, use specialty media designed for Xerox ink jet printers. Avoid extremely thin or thick paper, or chemically processed paper such as thermal fax paper, as frequent paper misfeeds may occur.
Selecting labels Use only paper face label stock. Ink will not dry on vinyl, plastic, or clear label stock. Individual labels will not feed properly. Letter or A4 sheet size for the labels is required at a minimum. For best results, use labels designed for an ink jet printer. The maximum quantity the tray can accommodate is 50 sheets. Do not use any label material that is partially used, folded, curled, or wrinkled. Selecting transparencies Use transparencies designed for ink jet printers only.
Printing DOS in a Window Chapter 6 Your DocuPrint C8 printer software includes a utility called the DOS Control Panel. You can use this utility to print from applications that do not have a printer driver or to print files directly from DOS in a Window. For applications that include a printer driver selection, the C8 is compatible with all PCL3c printers. Using the DOS Control Panel, you can change character sets, fonts, landscape or portrait layouts, and other settings.
4. The Installer will display a welcome screen. Select “next.” 5. The installer will display a license agreement. Select “Yes.” 6. The next window displayed is a list of software options that can be downloaded to your system. Select “DOS Panel.” 7. Select “next.” 8. Select “Finish.” To start your DOS Control Panel once it has been installed. • Select “Start,” “Programs,” Xerox DocuPrint C8, “DOS Control Panel” Note: DOS Control Panel will not run under Windows NT 4.0.
Index A About Page, 34 access the printer settings, 20 Align, 41, 53 B banner paper, 68 borders, 29 C Cartridge Clean, 53 Change Cartridge, 40 Collate, 21 Contrast, 32 control panel, 12 CPU, 16 D Default, 25 DOS, 69 DOS Control Panel, 69 E H Hard Disk Space, 16 Hardware features, 9 High Capacity Black Cartridge, 22 I Image Quality, 31 ImageFix, 31, 32 Images per sheet, 29 ink levels, 36 Interface, 15 L labels, 68 LED light, 12 Lighten/Darken, 32 M Maintenance, 38, 46, 51, 53, 56, 57, 60 margins, 54
P Page Layout, 26 Paper size, 15, 66 Paper tray capacity, 15 Paper weight, 15, 66 Paper/Output, 21 plain paper, 1, 14, 15, 66 Plain paper, 23 Poster, 26, 27 Power consumption, 15 power strip, 56 print head, 50 Print media, 15 print queue, 43 Print resolution, 14 Print speed, 14 Print yield, 14 Printable area, 17 printer cable, 49 Printer cable, 55 printer problems, 44 Printer Registration, 7 Printer specifications, 14 purge printer buffer, 55 R Random Access Memory, 16 recycled paper, 53 Restart, 37 72 R
