User guide

ManualsBrandsXerox ManualsEquipmentiGen4 Digital Press con Xerox EX Print Server Powered by Fiery-16493

5 of 20 Revision March 2007

Product Description

Weight g/m

Coating type Size Application

Number of

sheets run

Image

Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media

Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - Jan 2008

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a

particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing

has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Lazulis( Condat Gloss)

200 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jun-05 Print mottle present in prints, Poor toner adhesion, EIP mode may improve toner adhesion.

Xerox Colotech + Coated Gloss 210

gsm

Leykam Gloss

225 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use

Xerox Colotech+ Coated Gloss 210

gsm

Zanders Mega Gloss

216 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-04

Ningbo

250 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Dec-06 Jams frequently in stacker

Xerox Colotech+ Coated Gloss 250

gsm

Chorus Gloss

250 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity, Poor toner adhesion,Poor Stacking, folded corners Xerox Colotech + Coated silk 250 gsm

Galarie Gloss

250 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Print quality defects in a few sheets.

Xerox Colotech+ Coated Gloss 250

gsm

4CC Art

250 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Jun-04 Print quality defects in a few sheets.

Xerox Colotech+ Coated Gloss 250

gsm

Lustralux

260 gsm

Coated 2 side High

Gloss

SRA3 Full Colour 200 Yes Jun-07

Small quantity tested only, Poor Toner adhesion, caution should be used when running this

media.

Xerox Colotech+ Coated Gloss 250

Pionner Gloss

250 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Jun-04

Xerox Colotech+ Coated Gloss 250

gsm

Invercote Albato

250 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Excessive jams, Transfer issues, poor toner adhesion

Xerox Colotech+ Coated Gloss 280

gsm

Media Print Gloss

350 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Toner adhesion is marginal and EIP mode is advised. Fuser offseting may occur on long runs

Xerox Colotech+ Coated Gloss 250

gsm

Sappi Voltage

260 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes May-04 Poor Fusing, POTENTIAL SERVICE RISK

Xerox Colotech+ Coated Gloss 250

gsm

Leykam Gloss

300 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use

Xerox Colotech+ Coated Gloss 210

gsm

Lazulis( Condat Gloss)

300 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jun-05 Print mottle present in prints, Poor toner adhesion, EIP mode may improve toner adhesion.

Xerox Colotech + Coated Gloss 280

gsm

Dtec V4

300 gsm Coated 2 side Gloss SRA3 Full colour 3000 Yes Apr-05 Print mottle in heavt red colours, Gloss variations

Xerox Colotech + Coated Gloss 280

gsm

Splendorgel Ivory

300 gsm Coated 2 side Gloss SRA3 Greeting Card 100 Yes Apr-03

EIP mode may be needed for acceptable image permanence

Jams in stacker in Auto Duplex mode

Evaluation based on low volume test, POTENTIAL SERVICE RISK

Xerox Colotech+ Coated Gloss 280

gsm

Lumi Art

300gsm Coated 2 side Gloss SRA3 Covers 3000 Poor fusing, POTENTIAL SERVICE RISK

Xerox Colotech+ Coated Gloss 280

gsm

Novatech Gloss

300 gsm Coated 2 side Gloss 362 x 521 Software manual 3000 Yes May-05 Cockle in Printed sheets

Excelsior

300 gsm Coated 2 side Gloss SRA3 Greeting Card 100 Yes Apr-03

EIP mode may be needed for acceptable image permanence

Jams in stacker in Auto Duplex mode

Evaluation based on low volume test, POTENTIAL SERVICE RISK

Xerox Colotech+ Coated Gloss 280

gsm

High Tech Gloss

300 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor toner Adhesion

Xerox Colotech + Coated Gloss 280

gsm

Zanders Mega Gloss

300gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss

Xerox Colotech + Coated Gloss 280

gsm

Zanders Mega Gloss

350gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss

Xerox Colotech + Coated Gloss 280

gsm

Trucard Duo Gloss

350 gsm Coated 2 side Gloss SRA3 Swing Tickets 3000 Yes Feb-05

Black Label Gloss

350 gsm Coated 2 side Gloss 362 x 521 Software manual 3000 Yes May-05 Cockle in Printed sheets

High Tech Gloss

350 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor toner Adhesion

Xerox Colotech + Coated Gloss 280

gsm

Ningbo

350 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Dec-06

Print quality will show differential gloss.Jams frequently in stacker, Paper surface is soft and can

be easily damaged by handling and transport in Pres

Xerox Colotech+ Coated Gloss 280

gsm

Lumi Digital Gloss

350 gsm Coated 2 side Gloss SRA3 Full Colour 5000 Yes Jan-06 Toner adhesion variable from side to side. EIP mode will improve toner adhesion

Xerox Colotech + Coated Gloss 280

gsm

Leykam Gloss

350 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use

Xerox Colotech+ Coated Gloss 210

gsm

Not Recommended